Tungsten Cemented Sintered Carbide Wire Drawing Extruding Dies Nibs Pellet /Wheel
Tungsten carbide wire drawing dies
1. Our advantage
1 100% raw material
2 HIP Furnace Sintered
3 High precision grinding
4 Bore size up to 0.1mm
5 Produce finished dies with steel case
6 Fast delivery
7 Professional manufacturer of tungsten carbide products with 20 years experience.
8 Complete Quality Control System and strict inspection.
2. Our Mould size
Type W
Type S11
Type S12
Type S13
Type 22
Type 23
Type S30
Type S40
Type S41
Type S42
Type S60
Type R
在线联系供应商
Other supplier products
 |
Unground and polished tungsten cemented carbide rods | Tungsten Carbide Rods advantage 1.Material: 100% virgin raw material with submicron grain size; 2.Grade: Various grades for choice; 3.With strict t... |
 |
Tungsten Carbide Drawing Die for wires | Tungsten Carbide Drawing Die for wires 1. Diameter range (0.12—15.0)mm 2. Good wear resistance HRA 89.0—93.0 3. Excellent polishing 4. ... |
 |
Tungsten Rotary File, flame shape Rotary Carbide Burrs | Item:Tungsten carbide Burrs Sizes:Dia12x65mm-shank6,etc Teeth type:Double cut,single cut,roughing cut. Coating:Titanium coating rpm/min: Applicatio... |
 |
HSS/Tungsten Carbide Drill Bits/cutter Specially for Wood Working /Cutting Tool | Item:woodworking drill bit Flutes:2&4 flutes Type: left & right Sizes:12x75,etc Application: Suitable for hard and soft wood, For cutting ... |
 |
YG6 /K10 /K20 /K30 Wear Resistant Tungsten Carbide STB Plates Strips Bars /Plates /Wear Parts | Tungsten carbide plates Zhuzhou Grewin Carbide is engaged in manufacturing, exporting and supplying awide range of tungsten carbide tools, wear par... |
Same products
 |
NGM-5.1数显轨道仿形磨床 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 NGM-5.1钢轨仿形打磨机 该机主要用于铁路钢轨焊接接头及钢轨表面修复的成型打磨作业，数控进给单元的开发应用，实现了砂轮进给的智能控制，显著提高成型精度和... |
 |
NGM-4.8内燃数显钢轨打磨机 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 NGM-4.8I数显轨道打磨机 NGM-4.8I数显钢轨打磨机适用于43kg/m-75kg/m钢轨焊缝、不平整接头、钢轨侧肥边、钢轨表面焊补等部位的打磨，是集多功能、自... |
 |
NCM-5.1 岔道磨床 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 NCM-5.1 道岔打磨机 NCM-5.1道岔打磨机是专门针对道岔、交叉口及轨头两侧的打磨作业而设计的。该机打磨装置可从垂直方向向左右倾斜30°，并可沿纵横方向... |
 |
NGM-6.0钢轨成型磨床 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 NGM-6.0 钢轨成型磨床 该机采用西班牙进口M165二冲程汽油发动机作为动力，是用于轨头焊缝成型打磨及表... |
 |
锂电池供电的马车螺丝冲击扳手机 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 锂电池供电轨道螺栓扳手 锂电池供电轨道螺栓扳手机（型号：LJ-LDB171X）由主机、控制系统、电池系统、轨道行走部分组成。该机结构紧凑、重量轻、装拆灵活、使用方便、无废气... |
