DK7780F CNC electric spark wire cutting machine tool(super machine tool)
DK7780F (super machine tool)
Description
|
Type |
Unit |
DK7780F |
|
Worktable Size(W*L) |
mm |
900×1500 |
|
X,Y-axis trip（Y×X） |
mm |
800×1200 |
|
U,V-axis trip（U×V） |
mm |
70×70 |
|
Maxloadweightof automatic protection CNC Machine Tool |
kg |
2600 |
|
Maxlinearcuttingthickness |
mm |
800 |
|
Machined taper/work piece thickness |
12°/80mm |
|
|
Z-axiselevationmode |
Manual/electricelevation |
|
|
Type of guide track |
Slide guide |
|
|
Electrode wire diameter range |
mm |
Ф0.15~0.20mm |
|
Wire speed |
m/sec |
1~11.4m/sec 7frequency conversion adjustable |
|
Machining accuracy |
mm |
≤0.015 |
|
Maxcutting efficiency |
mm²/min |
≥120 |
|
Optimum surface roughness |
um |
Ra≤2.5 |
|
Control modeof auto power off CNC Machine Tool |
X,Y,U,Vsteppermotor |
|
|
Number of control axis |
Four-axis linkage |
|
|
Min instruction unit |
mm |
|
|
Power supply |
380VAC/50HZThree-phase four-wire380VAC/50HZ |
|
|
Maxoperating current |
A |
12 |
|
Machine tool power consumption |
kw |
＜2 |
|
Working fluid |
DX-1 DX-4Nanguang-1 |
|
|
Working fluid tankvolume |
L |
55 |
|
Work liquid filtrate way |
Strainer |
|
|
Host weight |
kg |
4600 |
|
Host outline size |
mm |
3000×2700×2200 |
在线联系供应商
Other supplier products
 |
Medium Speed Wire-Cutting Machine | Description Machine tool type PD-40SE/ST Worktable Size (W*L) 850×600mm Max trip of X,Y-axis of the worktable （Y×X） ... |
 |
High-Speed Drilling EDMS | Product category: Product model: WJD730 Brand: Wenjie CNC Manufacturer: The electro discharge drilling machine tool is mainly used for wire... |
 |
cone machining CNC Machine Tool | Description Type Unit DK77120 DK77120B DK77120F DK77160 Worktable Size (W*L) mm 1900×1310 2100×1310 2300&tim... |
 |
CNC linear cutting machines | CNC Machine Tool- Product category: CNC Machine Tool- Product model: Single-chip microcomputer control system Brand: Wenjie CNC Manufacturer: Taizh... |
 |
Medium-Speed Wire-Moving Linear Cutting—Servo High-End PD-SE | —Servo High-End PD-SE Product category: Medium-speed wire-moving Product model: PD-SE Brand: Manufacturer: Taizhou Wenjie CNC Equipment... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
