HM-100 High-temperature Hygronom
Overview
Hygronom is also called moisture meter or dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, it also can be used in industrial online humidity monitoring.
HM-100 gas moisture meteris equipped with an internal high-precision capacitance digital temperature & humidity sensor. The installation method adopts the in-situ immersion installation. It is a self-developed product, of which, the core component is from Switzerland. Put the sensor inside stack to get in touch with flue gas. The probe needs preheating to prevent gas from condensation, which will affect the measurement of moisture in the flue gas. After gas contacts with the measurement chip, the chip will change capacitance to measure flue gas concentration.
Features Of HM-100 High-temperature Hygronom
• The product is convenient for installation, disassembly, and cleaning with small and compact structure
• Direct and simple key operation on site
• The probe is equipped with heat tracing function to prevent condensate water from damaging humicap and thermal resistance
• Imported core components with high-performance index and reliability
Technical Parameter Of HM-100 High-temperature Hygronom
|
Measurement Range |
H2O: 0~40.00%(volume percent)(optional) |
|
Humidity sensor |
Resistance-capacitance |
|
Temp sensor |
Pt100 platinum resistor |
|
Accuracy |
0 ～ 40.00% H2O: ± 2% |
|
Repeatability |
0 ～ 40.00% H2O: ± 1% |
|
Stability |
0 ～ 40.00% H2O: ± 1% FS / 7d |
|
Response time |
T90 ＜ 6s |
|
Sensor life |
＞2 years (under normal use) |
|
Transmitter life |
＞5 years (under normal use) |
|
Power supply |
220VAC |
|
Instrument weight |
About 10kg |
|
Power consumption |
Maximum about 35VA (heating) |
|
Ambient temperature |
Transmitter: -10°C～+55°C |
|
Probe: 0～180°C (except probe cable) |
|
|
Ambient humidity |
＜95%RH |
|
Sample gas flow |
(2 ~ 6) L / min |
|
Analog output (2 sets) |
Temperature and humidity, 4-20mA |
|
Communication |
Rs232 (standard) |
Typical Application Of HM-100 High-temperature Hygronom
在线联系供应商
Other supplier products
 |
LGT-106 By Pass Laser Gas Analyzer | Overview LGT-106 is a flameproof bypass type tunable laser gas analyzerfor industrial on-line analysis and environmental on-line monitoring, especi... |
 |
HM-100 High-temperature Hygronom | Overview Hygronom is also called gas moisture meteror dew-point meter, which is used to measure the humidity of flue gas emitted by pollution sourc... |
 |
Humidity Analyzer | Hygronom is also called moisture meter or dew-point meter, a kind of humidity test meter, which is used to meter humidityof flue gas emitted by pol... |
 |
Classification of Humidity Meter Gauge | Hair humidity meter gauge The length of hair and some synthetic fibers varies with the relative humidity of surrounding gases: the longer the rela... |
 |
ERMS-2000-V Vertical Stationary Vehicle Exhaust Remote Sensing System | Overview ERMS2000-V vertical stationary vehicle exhaust remote sensing system is a system that sets above the multi-lane and monitors the exhaust p... |
