Optical Tool Setter

Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradually focused its main business on developing CNC tool setterand touch probe. its production, and sales.We developed probes, tool setters, and a variety of probe styluses of the three series of products. As the first probe manufacturerin the field of CNC machine tool probe in China, Pioneer has always persisted in independent development pioneer machine and tool and worked hard to reach the world advanced level.

OTC200 optical tool setter/presetter is a wireless tool setter, optical coded signals are used to transmit information between the CNC tool setter and the receiver. It mainly used in various specifications of small to medium machining centers, CNC milling machines, drilling machines center, and so on. It used for broken tool detection and rapid measurement of tool length and diameter on a wide range of tools.

OTC200 optical tool presetteris a wireless tool setter, optical coded signals are used to transmit information between the CNC tool setter and the receiver. It mainly used in various specifications of small to medium machining centers, CNC milling machines, drilling machines center, and so on. It used for broken tool detection and rapid measurement of tool length and diameter on a wide range of tools.

Parameter of Optical Tool Setter

OTC200：
Measuring direction	±X，±Y，+Z
Arbitrary direction swinging angle	X-Y±12°, Z +5 mm
Repeatability （2σ）	≤ 2 μm；
Optical signal receiving/sending distance	>3m
Model of the standard stylus	M0-S31.5-CP12.7
Model of the battery	14250，3.6 (V), 2 Pcs
Seal grade	IP68

Drawing of Optical Tool Setter

Technical Characteristics of Optical Tool Setter

Tool setter switch on/off method: M code on/off；

Compatible with Pioneer optical modulated receivers (OSI-20M and OSI-30);

Exceptional resistance to light interference with modulated transmission;

Cable-free for unrestricted machine movement and ease of installation.

Application of Optical Tool Setter

For tool measuring on small to medium machining centers.

Detect broken tools in-process

Compensate for environmental and machine conditions

Reduce non-productive time and scrap and increase productivity and profits

Other supplier products

	EP60 Electrical Probe	EP60Electric probe includes a electric probe unit and a taper shank. There is an unclosed power circuit inside the probe. When the stylus contacts ...
	PIONEER CNC MACHINE TOOL PROBE & SETTER SYSTEM & TOUCH PROBE SOFTWARE	Harbin Pioneer's product design is based on the realization of satisfying their own functions and using more ideas to carry the connotation, then p...
	TTC400A Cable Tool Setter Unit	Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua...
	CNC Machine Tool Touch Probe System	Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua...
	Cable Tool Setter System	The electronic tool length settersystem is suitable for various specifications of machine centers, CNC milling machines, drilling-tapping machine c...

供应产品

Same products

	GT-FM24-PLC填粉机机(3+9+9+3)三导管	卖方: 肇庆古雷特科技有限公司	* 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一...
	High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing	卖方: Eurion Automation Co., Ltd.	高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ...
	GT-FM18-PLC灌装机(8+2+8)三导管	卖方: 肇庆古雷特科技有限公司	* 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一...
	48工位填粉机 GT-FM48	卖方: 肇庆古雷特科技有限公司	* 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机...
	8工位填粉机 GT-FM8	卖方: 肇庆古雷特科技有限公司	* 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装...