ALUMINIUM ROLL FORMING MACHINE
How to Prevent Rust Treatment of Aluminum Profile Cold Forming Machine
The gear oil used in the machine tool of the aluminum profile cold forming machine must be introduced into the automobile fuel tank after severe stress. The automobile fuel tank of the cold forming machine must be cleaned before loading. The aluminum roll forming machineis generally recommended for application No. 31. The hydraulic oil machine equipment is the oil equipment of 46 machine. The cold forming machine must do a good job in cleaning and maintaining the oil and the machine, which has a good effect in preventing the machine from scaling or oil leakage.
The initial use time of the cold forming machine shall not exceed two months. When replacing the cold forming machine, the filter shall be cleaned together with the car oil tank. The filter can be put into gasoline for cleaning. Compressor lubricating oil must be stored in a clean and dry place, If it is not moldy, the cold forming machine can still be used after careful inspection.
Check the machine and equipment frequently for moisture. After finishing the work of one shift, use hydraulic cylinder for cold forming. If the cold forming machine is not used for a long time, the surface shall be coated with antirust agent.
olling Shutter Slats Roll Forming Machine's Characteristics and Operating Procedures:
It is convenient to replace the spare parts, and it can be used again only by tightening the screws to the assembly line.
BOSJ is a leading roll forming machine manufacturers in china, we provide aluminium forming machine, china roll former and etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
Roll Forming Machine | In the BOSJ Plant, you will get an exciting look behind the scenes of china cold roll forming machineparts manufacturing and installation. The tour... |
 |
PIPE ROLL FORMING MACHINE | The pipe roll forming machineis a high-quality, high-efficiency rounding device for winding carbon steel, stainless steel and non-ferrous metal pro... |
 |
PROFILE ROLL FORMING MACHINE | The steel profile roll forming machinemainly consists of four parts: The first is the input section - in this section, the material is loaded at... |
 |
C & Z PURLIN ROLL FORMING MACHINE | C and Z purlins are high-efficiency economical profiles. Due to the reasonable cross-sectional shape, they enable steel to perform at a higher leve... |
 |
CABLE TRAY ROLL FORMING MACHINE | Cable trays are becoming more and more widely used in modern buildings. Traditional manual production can no longer meet the demand, and the indust... |
