TTC100 Cable Tool Setter System
TTC100 cable setter system includes the z tool setterunit, 20mm thick mounting base,blow-cleaning device(optional), and standard measuring software. The TTC100 cnc z axis tool setteris a length tool setter in cnc z axis tool setter. TTC100 cnc tool zero setteris triggered when a tool touches the contact face. A trigger signal of cnc zero setteris sent to the machine tool controller via the hard-wired cable and the tool length is automatically calculated. Pioneer, a professionalcnc z axis zero toolsetter supplier in China, can provide you with high-precision CNC Z axis zero tool. If you are interested in our TTC100 CNC Z-axis zero tool setter, welcome to contact us!
Fanuc tool setter parameter
|
TTC100： |
|
|
Measuring direction |
-Z, 5mm |
|
Nominal height of the TTC100 tool setter |
80mm |
|
Repeatability （2σ） |
≤ 2 μm； |
|
Diameter of the touching face |
|
|
Hardness of the touch face |
HRA 90-93 |
|
Input voltage |
24±10% VDC |
|
Output load current |
50 mA |
|
Seal grade |
IP68 |
Application of TTC100 Cable Tool Setter System
TTC100 sets lengths parameter of cutting tools automatically on various types of CNC machine tools
TTC100 tool setter can detect tool wear and breakage automatically between two processes or after the CNC processing;
TTC100 tool setter can control the change of machining precision from the temperature change of the machine by checking cutting tool length.
Technology of TTC100 CNC Z-axis Zero Tool Setter System
Tool setter transmits a signal through cable, reversal connecting tool setter's power supply can reverse the state of the output signal;
There are two installing and fixing methods, one is to install directly, the other is to add a mounting base of 20mm thick, the tool setter's height can be raised from 80mm to 100mm.
One LED indicator light is used to display the tool setter's working state.
Pioneeris a professional probe factory, we provide touch probe, probe stylus, lathe probe, pioneer machine and tool, z setter cncand etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
Cable Tool Setter System | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradu... |
 |
EP60 Electrical Probe | EP60Electric probe includes a electric probe unit and a taper shank. There is an unclosed power circuit inside the probe. When the stylus contacts ... |
 |
CNC Tool Setter System | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
 |
Optical Tool Setter | Harbin Pioneer's product design is based on the realization of satisfying their own functions and using more ideas to carry the connotation, then p... |
 |
EP40 Electrical Probe | EP40electric probe includes a electric probe unit and a 20mm diameter cylindrical shank. The electric probe senses the contact with the metal workp... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
