Hydraulic Shearing Machine
1. According to the shape of the scissors, the shearing machines are divided into straight knife shears and disc knife shears. Straight knife shears are divided into gantry shears and throat shears according to the structure. The disc cutter shearing machine is divided into a disc shearing machine, roller shearing machine, multi-disc shearing machine, and rotary trimming shearing machine according to the structure.
2. According to the trajectory of the knife holder, the shearing machine is divided into the following types according to the trajectory of the knife holder:
(1) The knife holder moves along the vertical line, because there is no forward inclination, so the upper blade section must be processed into a diamond shape, so there are only two edges (a rectangular blade with four edges is also available, but the cutting quality is poor). The fracture of the frame shear is not at right angles to the board surface.
(2) The knife holder moves along the forward inclined line (the angle between the vertical line and the vertical line is 1 ° 30 ′ ～ 2 °). The upper blade section can be processed into a rectangular shape with four blades. The shear fracture is basically at right angles to the board surface.
(3) The blade holder swings along the arc, and the cutting blade section should be processed into a diamond shape, so there are only two blades. Since the upper blade is slightly forward during the cutting process, the cutting quality and the blade holder are inclined forward. Linear motion is similar.
(4) The tool holder swings along the arc, and the forward inclination angle can reach 300, so the welding groove can be cut out.
3. According to the transmission mode, the tube shearing machine is divided into: the mechanical hydraulic shearing machine for sale and the hydraulic transmission shear trigger.
As one of the most professional hydraulic shearing machine suppliers, we provide tube mill machine, roll forming equipment, coil upender, rail & roll, hydraulic metal shear for sale, shear forming machine, hydraulic angle shear, roll forming mill and etc. For more, contact us.
Other supplier products
|
|
Large Diameter Spiral Pipe Mill |
A spiral seam pipemill is used to roll the low carbon steel/ low alloy steel strip into a tube by a certain forming angle and further weld it into ... |
|
|
AUXILIARY EQUIPMENT |
The Auxiliary equipment refers to machines for metal sheets before being formed and profiles after formed.
The equipment for metal sheets includ... |
|
|
Garage Door Guide Rail Roll Forming Machine |
Garage Door Guide Rail Roll Forming Machine Introduction
This light steel frame machineis used to make various guide rails. A guide rail is a devi... |
|
|
Rolling Shutter Door Roll Forming Machine |
This series of rolling door machines are mainly used to make various rolling shutter door panels. Our rolling shutter slats roll forming machineis ... |
|
|
Roof Panel Roll Forming Machine |
This metal cladding roll forming machineis used to roll-form metal roof panels and metal wall panels. The roll forming line usually includes metal ... |
供应产品
Same products
