What Are the Advantages of an Oil Well Bit?
What Are the Advantages of an Oil Well Bit?
The oil wellbitis one of the widely used drilling bits, which has the characteristics of adapting to a wide range of formations and high drilling speed of machinery and equipment.
The oil well drill bit is composed of more than 20 parts such as cutting structure, bearing structure, locking element, oil storage seal installation and nozzle installation. The current motor is repeatedly used by the motor in the wellbore, forming the front part of the motor with greater rigidity, smaller relative discharge area, and higher relative return velocity. The upper annulus is taken to form a vortex that affects the cuttings at the front. The formation of accumulation affects the drilling speed, and further formation of the repeated fragmentation of those cuttings by the PDC drill bit, which is easy to form a mud pack of the bit remover.
(1) The steel ball is used to lock the roller, which can be suitable for relatively high speed.
(2) The O-ring seal adopts a wear-resistant, highly saturated nitrile rubber, which increases the cross-section of the seal ring, and adds a small sealing boss at the outer end of the seal area to improve the sealing performance.
(3) The oil well drill bit uses high-strength and high-toughness alloy teeth, which improves the ability of the teeth to resist impact and reduces the probability of tooth breakage. Soft formations are inlaid with spoon-shaped teeth.
(4) The bearing of the palm of the oil well bit is covered with a layer of hard alloy, and there is also a silver-plated layer on the roller shaft to improve the anti-bite and load-bearing capacity.
(5) The oil well drill bit uses a grease that can withstand a temperature of 250°C and has low wear, which improves the ability of the drill bit.
(6) The optimized number of teeth of the oil well bit and the equipment such as exposed teeth and alloy teeth can realize the bit cutting and speed at a larger height.
If you want to know more details of drill bit manufacture, please visit our website.
在线联系供应商
Other supplier products
 |
How to Use Tricone Bit Appropriately? | How to Use Tricone Bit Appropriately? (1) According to the lithology of the drilled formation, the following principles should be followed when se... |
 |
Roller Bit | Overview of Core Barrel Roller Bit The roller bit core barreluses high carbon steel and a special bit Angle to maintain drilling strength and effi... |
 |
Matrix Body PDC Bit | GREAT, as one of the professional drill bit manufacturers in China, we design and manufacture a wide variety of Matrix body PDC (polycrystalline di... |
 |
Matrix Body PDC Bit For Oil Well Drilling Hard Rock | Overview of Matrix Body PDC Bit GM1605T Matrix body PDC bit GM 1605T is made by Tungsten carbide powder, this type of matrix body bit is very high... |
|
|
What Are the Advantages of an Oil Well Bit? | What Are the Advantages of an Oil Well Bit? The oil wellbitis one of the widely used drilling bits, which has the characteristics of adapting to a... |
Same products
 |
GT-DG250 轧辊机 | 卖方: 肇庆古雷特科技有限公司 | • 产品描述 GT-DG250 缩管机采用一组对辊组件，根据需求加工孔位，逐孔逐级（由大到小）对管材进行缩径。可用于加工铜、铁、不锈钢、铝等材质的圆管、方管、扁管、椭圆管。 &bu... |
 |
Double Spindle Lathe NL251D | 卖方: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | 卖方: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
