Adaptor

Adapter is one of the most important part of G.E.T system, especially the cast lip system. Either made by casting or forging, an adaptor installed between the lip and the tooth. It's nose and pocket support the main structure.

WALKSONmainly focus on providing big size cast adaptors, components made by casting. The main material for this adaptor is low alloy high strength steel which contains chromium, nickel, and molybdenum. The typical weight of them range from 100kg to 300kg. After quench and temper, the final microstructure is mainly tempered martensite. Its mechanical property result can achieve 1200 tensile strength with 25 J/cm2 impact energy at ambient temperature and hardness of the casting surface is between 380~420 HBW.

WALKSON Ensures High-quality Adapter

WALKSON has an incredibly good control of the manufacture processes which is the key factor that we can provide high quality cast adaptor. The main measures to ensure good products are made as below.

Casting methods design is the first important step to achieve a good quality adaptor. As WALKSON has very experienced methods engineer assisted with the FEM software such as Magmasoft / Intecast. We will conduct FMEA at prototype stage to avoid most of the casting defects that may happen during the following manufacture process.

Following the methods designing is pattern tooling designing, the designing of the pattern tooling also has a big influence on the final casting quality, such as the core print draft, the contraction scale, good pattern tooling designing can make sure a clean mold cavity is obtained after close and accurate nose and pocket size and location are achieved.

The key to the molding process is to make sure the shopfloor operation is conducted strictly according to the methods card. Such as using the correct sleeve/chill or isotile brick, as this has a direct influence on the adaptor's inner quality. The paints baume degree and paint coating thickness control is important, the surface quality rely a lot on them.

During melting process, the key control point is online element analysis, WALKSON’s foundry has spectrograph and can adjust all the element to the required value. Wire injection machine with CaSi wire is highly practical for deoxidation. And Zirconium is a good option if the AL level is considered. At last are the tapping temperature and pouring temperature and pouring time control. WALSKON use bottom pour ladle which is also big advantage to make clear casting.

After knock-out, pneumatic knock-off gun is used to knock off the feeders, ingates and runner bars. Normally the knock-out temperature is recommended to below 50 ℃. On one hand this can improve the working efficiency, on the other hand it can reduce the cracks caused by traditional hot cutting. On one hand this can improve the working efficiency, on the other hand it can reduce the cracks caused by traditional hot cutting.

During the heat treatment stage, the heat treatment tray, the loading methods, the capacity of the quench tank, the speed of agitation system, the heat quenching temperature and the transfer timing are extremely sensitive as those factors affect the final mechanical property. WALKSON has very good heat treatment facility, the uniformity of the oven we can control is within +/- 2 ℃.

WALKSON also has a lot of experience in the adaptor gauging designing and manufacture process, which is can make sure the batch production complies with dimension requirement.

Why Choose WALKSON Adapter

WALKSON is very experienced in making high-quality adaptors. We have been supplying adaptors to mine sites in European, Africa, Russia, Australia, South America, and Canada for brands like CATERPILLAR, BUCYRUS, LIEBHERR, P&H, TEREX, УЗТМ, OMZ, HITACHI, DEMAG, DOOSAN, KOMATSU, O&K, URALMASH. Choose us you will get the best quality adaptor and a reliable partner.

For more informationabout stainless steel casting, please feel free to contact us!

Other supplier products

	Ball Valve	WALKSON, as a reliable electric ball valve company, supplies main parts for high temperature ball valve, consisting of Valve Body, ball, stem and s...
	Chocky Wear Bars, Wear Buttons	The unique, formable design of Chocky wear bars and wear buttonare available in various lengths, grades and sizes and can also be customized as per...
	Rigging Components	Rigging Components WALKSON manufacture most parts of the dragline riggingand structural component for buckets used in the surface mining industry....
	Ni-hard Wear Liners/ Billets	Ni-hard Wear Liner/ Billets NiHard is a well-established white iron product alloyed with nickel and chromium to give significant abrasion and imp...
	CrMo Alloy Liners	WALKSONcan provide a wide range of wear resistant products for mineral processing industry. The role of a CrMo mill lineris to give the mill heads ...

供应产品

Same products

	GT-SW30 单头管拍机	卖方: 肇庆古雷特科技有限公司	• 产品描述 GT-SW30 单头管拍机是专为多规格、小批量工业加热元件生产而设计。它可生产高密度的筒式加热器和双端管状加热器，并具有更换模具简便快捷的特点。 • 主要细...
	SW01 圆管拍机	卖方: 肇庆古雷特科技有限公司	• 产品说明 GT-SW01 型锻机主要用于热流道加热器的减径加工。此设备适用于小直径圆棒状加热器的减径加工。 • 主要特点 1. 可对加热器进行减径加工，提高材料密度...
	XJS-HPS-350X Down-paper pillow packaging machine	卖方: Foshan Kinsun Intelligent Equipment Technology Co., Ltd	XJS-HPS-350X Down-paper pillow packaging machine Product Description Suitable for packaging sof...
	XJS-AW-FB Powder Filling Line	卖方: Foshan Kinsun Intelligent Equipment Technology Co., Ltd	XJS-AW-FB Powder Filling Line Product Description Unscrambling Machine→Empty tank air blow...
	XJS-M Roll Film Bag Making Vertical Packaging Machine	卖方: Foshan Kinsun Intelligent Equipment Technology Co., Ltd	XJS-M Roll Film Bag Making Vertical Packaging Machine Product Description XJS-Mseries is a roll...