Common Quality Problems of Induction Quenching Machine and Ways to Improve Its Working
Performance
Ⅰ. Quality problems that often occur in high frequency hardening
The application of induction heating equipment in the quenching process is becoming more and more extensive. With the continuous improvement of this process, we generally encounter the following problems:
Ⅱ. Ways to improve the working performance of super audio frequency or high frequency induction heating power supply
In the process of actually applying super frequency or high frequency induction heating to induction quenchingmachine of machine-heated workpieces. In order to ensure the required performance and technical requirements, in addition to preventing the above defects, it is important to consider the state and technology of the parts before and after heat treatment. request etc.
According to the characteristics of the induction heating equipment, the structure of the inductor, the working conditions of the parts, etc., combined with the following precautions, the process flow and process parameters are correctly designed to produce qualified products.
- quenching machineof parts heated with induction heating equipment, the depth and distribution of the hardened layer should be reasonably determined, which affects the stress distribution of the parts and the fatigue strength of the surface.
- induction heating machineshould protect the threaded holes, pin holes and oil holes on the parts, such as blocking with copper material, to prevent the parts from overheating and quenching and cracking there.
If you are looking for a reliable induction heating manufacturer, don't hesitate to contact us!
在线联系供应商
Other supplier products
 |
Induction Heating Machines In Aviation And Aerospace | Aviation and aerospace are manifestations of high standard industrial capabilities. Induction heating is widely used in the aerospace industry, and... |
 |
Medium Frequency Induction Heating Machine | If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep heat treatment, the MFS series of intermediate fre... |
 |
Jkz888!!! | The frequency range of the MFS-500A 500KW IGBT type medium frequency generator is from 1KHZ to 10KHZ. Designed based on customers' actual billets s... |
 |
SWP-HT 30KHz-60KHz Medium Frequency Induction Heating Machine | SWP-HT 30KHz-60KHz Medium Frequency Induction Heating Machine SWP machineseries are JKZ's newly designed and manufactured induction heating power ... |
 |
Wooden Carbide Brazing | Wooden Carbide Brazing In the wooden cutters making process, it is necessary to combine the cutter head and the cutter body. Most of the time, m... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
