Cementing Plug
Saigao Rubber plug used to separate the cement slurry from other fluids, reducing contamination and maintaining predictable slurry performance. Two types of cementing plug are typically used on a cementing operation. The bottom plug is launched ahead of the cement slurry to minimize contamination by fluids inside the casing prior to cementing. A diaphragm in the plug body ruptures to allow the cement slurry to pass through after the plug reaches the landing collar. The top plug has a solid body that provides positive indication of contact with the landing collar and bottom plug through an increase in pump pressure.
A Cement Plugis a separator that acts as a barrier between cement slurry and hydrocarbons present in a reservoir. This plug is made up of rubber and is also known as a wiper plug. The primary purpose of using the plug during cementing jobs is to prevent or reduce any contamination of hydrocarbons from cement slurry and maintain the predictable slurry performance.
SAIGAO GROUP, as an excellent oil well equipment manufacturers, offers a wide range of oilfield cementing tools for you to choose from.
在线联系供应商
Other supplier products
 |
Drilling Tools | Drilling Toolsfor sale In order to explore and exploit oil and natural gas deep in the strata, people must use a variety of drilling equipment and... |
 |
Lifting-releasing and Circulating Overshot | Lifting-releasing and circulating overshotis a fishing tool used to retrieve the fractured tubing and drill string in the casing. If the drill stri... |
 |
BW200/4 Horizontal Double Cylinder Reciprocating Double Acting Piston Pump | BW200/4 mud pump is widely used in mining, drilling, coal, railway, highway, water conservancy and hydropower, bridges, high-rise buildings, founda... |
 |
Wellhead Equipments | A Few Words about Wellhead Equipment A wellhead is a component located on the surface of oil or gas well, which provides structure and pressure ... |
 |
Lifting Sub | Lifting Subis a special above ground tool for lifting drilling tools in oil and gas industry and geologic exploration. It resembles a pup joint, an... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
