ROCK REAMER
There is no fixed tooth shape and bearing for the hdd rock reamer, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure, mainly to prevent the roller falling off after the roller bearing is damaged, resulting in the accident in the hole. The hole opener bitis suitable for horizontal directional drilling construction, with high design strength, good wear resistance, long service life and good safety performance. The reaming size is 220~1600mm.
Types Of Rock Reamer
Roller Cone Reamer
It means that the teeth using the hole openerare milled teeth, that is, the teeth milled out on the matrix of the roller, whose wear resistance is relatively poor. In order to improve its wear resistance, it is often coated with a hard alloy layer.
What Are Rock Reamer Made Of?
01
The Structure Of The rock river reamersIs Shown In The Figure
The rock reamer mostly uses the single tooth palm of the cone bit and the cone as one cutting edge,
02
With The Number Of Cutting Edges At Least 3
The cone reamer is composed of a rear centering plate, a rear baffle.
03
A Mandrel
A front baffle, a front centering ring, a front centering plate, a cone, and a tooth palm.
04
The Reamer Uses Welding Process To Connect And Fix The Components.
In the process of hole reaming, the screw drill provides torque and the drill provides tension.
As a professional drill bit factory, SML has high-quality drill bit wholesale. Welcome to contact us if needed.
在线联系供应商
Other supplier products
 |
SHAPED PDC CUTTER | Polycrystalline Diamond Composite (PDC) merges thin layers of diamond with a cemented carbide base, blending diamond's wear resistance with carbide... |
 |
ROCK REAMER | There is no fixed tooth shape and bearing for the hole opener bit, so it is necessary to select appropriate tooth shape and bearing structure accor... |
 |
TCI Tricone Bit | Under the effect of the WOB and the twist of the drill string, the teeth of the tci drill bitare crushed and eaten into the rock, and at the same t... |
 |
Steel Tooth Tricone Bit | The teeth are processed by milling, and the teeth are all wedge tooth. Using floating bearing structure. Using high -density metal sealing. ... |
 |
PDC DRAG BIT | The PDC drilling drag bit consists of four parts: the bit body, the scraper blade, the water divider cap and the nozzle. The drill body is the body... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
