STEEL TOOTH BIT
The teeth of Steel Tooth Bitare made by milling and processing of tooth wheel blanks, mainly wedge-type teeth, and the structural parameters of the teeth should be balanced to facilitate rock breaking and strength of the teeth. Generally, the tooth height, tooth width and tooth spacing are larger in soft strata, while the opposite is true in hard strata. Usually, carbide is applied to the working surface of the teeth to improve the wear resistance of the teeth, and carbide layer is applied to the back vertebrae to achieve the purpose of diameter preservation.
Different Types Of Steel Tooth Bit For Sale
Steel Tooth Tricone Bit
Steel Tooth Bit are drilled on the tooth wheel and then teeth made of carbide are inserted into the hole.
What Strata Are Steel Tooth Bit Suitable For?
IADC517: Low compressive strength, high drillability soft strata, such as shale, clay, sandstone, soft limestone, etc;
IADC537: low compressive strength, medium soft, with hard abrasive interbeds, such as hard shale, hard gypsum, soft limestone, sandstone, dolomite with interbeds, etc.;
IADC617: high compressive strength, medium hard, with thick hard interlayer, such as hard shale, limestone, sandstone, dolomite, etc.;
IADC637: High compressive strength, medium hard and highly abrasive strata, such as limestone, dolomite, sandstone flint, etc;
The Difference Between Steel Tooth Bit And TCI Bit
TCI (carbide teeth on tooth wheel) Bits. The teeth are made of high strength and high toughness carbide teeth. The optimized design of the number of rows, teeth, height of the exposed teeth and the unique shape of the alloy teeth give full play to the high wear resistance and excellent cutting ability of the teeth. The cutting structure of the flanged drill bit has high anti-wear and load-bearing capacity, and its service life is long, especially for crushing hard and highly abrasive formations, such as tunnel stone and quartzite, etc., with better effect. The tci bit are widely used in oil drilling because they are suitable for a wide range of formations.
Steel Tooth Bits are also called milled tooth drill bits, and their teeth are milled directly on the tooth wheel blank. Steel tooth bits are mostly used in soft upper formations, but they are also used in less abrasive formations. In order to improve the wear resistance of the teeth or to make the teeth self-sharpening, a layer of tungsten carbide powder is welded on the surface of the teeth and on the diameter-keeping surface. The new wear-resistant material on the tooth surface improves the life of the cutting teeth while maintaining the high mechanical drilling speed of the steel tooth bit.
As a professional drill bit suppliers, SML has high-quality pcd drill bit. Welcome to contact us if needed.
在线联系供应商
Other supplier products
 |
TCI BIT | The tci tricone bithas the characteristics of wide adaptability to the stratum and high mechanical drilling speed. As a TCI/MI tricone drill bit ma... |
 |
TCI Tricone Bit | Under the effect of the WOB and the twist of the drill string, the teeth of the tci drill bitare crushed and eaten into the rock, and at the same t... |
 |
PDC BIT | Big blade design: The blades of all PDC drilling series are raised and increased. Using oversized crumb running design can more effectively move dr... |
 |
MATRIX PDC BIT | PDC bit is the abbreviation of Polycrystalline Diamond Compact Bit, also known as Polycrystalline Diamond Cutting Block Bit or Composite Chip Tooth... |
 |
PDC BITS- MAKE MAXIMIZE PERFORMANCE | PDC Bit for Sale PDC bits are polycrystalline diamond compact bits. PDC bits are widely used in oil drilling because of their fast drilling speed, ... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
