5kN Universal Testing Machine 丨5kN Universal Tester

Product Introduction

This series of testing machines realizes the automatic control of the test process, data acquisition and analysis through the computer, and realizes the full digitization and automation of the data acquisition, analysis and control process. The control and data processing software with WINDOWS as the operation interface realizes the computer display of test force, test force peak value, beam displacement, test deformation and test curve. The good humanized design makes the test operation easier. The machine can realize three closed-loop control of test force, deformation, and displacement, and can smoothly switch between control modes such as constant stress, constant strain, and constant displacement. It is widely used in industries such as waterproofing membranes to detect and analyze the mechanical properties of non-metallic and composite materials. It is an ideal testing equipment for scientific research institutions, universities, industrial and mining enterprises, technical supervision, quality inspection and other departments.

Standards Compliant

Manufactured according to GB / T2611 "General Technical Conditions for Testing

1. Manufactured according to GB / T2611 "General Technical Conditions for Testing Machines"

and GB / T 16491-2008 "Electronic Universal Testing Machine" standards;

2. Perform verification and acceptance according to GB / T12160 "Regulations for

Extensometer for Uniaxial Test" and GB / T16825 "Inspection of Tensile Testing Machine"

3. Applicable standards: apply ASTM D5034/D5035. ASTM D5587. DIN, ISO13934-1. JIS, BS and

other international standard

Product Structure Function

This series of testing machines are of single-arm structure.

1. This series of machines adopts AC servo motor and servo drive speed control system to drive the precision ball screw pair to move up and down, and then realize the wide range of stepless adjustment of the test speed, ensuring the high precision, low noise and high stability of the test process.

2. The test control system has the advantages of high integration, stable performance and convenient adjustment. The experimental data can be collected in real time, and the experimental characteristic curve can be dynamically displayed in real time. The experimental data files can be saved in the way of Access common databases, which is convenient for the realization of customer resource sharing and network management, as well as user re-analysis. For user-defined various word2000 reports, the software can be easily accessed, which solves the problem that different users or the same user have different needs for test reports in different periods. The software can process the original data of test force, displacement, time, deformation and curves derived therefrom.

3. Protection function: The machine has software and mechanical limit protection modes, and the proportion of automatic shutdown when the maximum load is exceeded can be dynamically set; it has multiple protection functions such as overcurrent, overvoltage, and overload.

4. The load and deformation channels can be automatically marked, which is intuitive and convenient.

5. The batch test can realize the hierarchical display of the curve, and the curve automatically follows.

6. The software can realize user-defined speed setting and computer adjustment of speed. It can also achieve high-precision speed calibration, and adjust the speed gear and code at any time.

7. Monitoring the test process: Real-time display of various parameters such as test force, deformation, displacement, and curve during the test process.

8. Software authority hierarchical management function: In order to improve the security of software and data, the software can realize the function of authority management by setting different password protection.

9. Result reproduction function: After the test operation is completed and saved, it can be opened and re-analyzed the test data at any time in the future according to the user's needs.

10. The software operation interface is shown in the figure (the software is slightly different for different test requirements).

Standard Configuration

1. Test machine host 1 set

2. 1 set of test control software

3. 1 set of data acquisition card

4. Stepper motor 1 set

5. Deceleration system 1 set

6. 1 sensor

7. Photoelectric encoder 1

8. 2 sets of ball screws

9. Stretching accessory 1 set

10. Compression accessories: pressure plate Φ100 1 pair

11. 1 set of random tools

12. Random documents, instruction manual, certificate, etc.

Technical Parameters

1. Nominal Force: 5kN

2. Dual Column

3. Test speed: 0.1 – 500 mm/min (stepless speed regulation)

4. Deviation from set speed: ±0.1%

5. Accuracy level of force measurement: Level 1

6. Position accuracy: ± 1 microns

7. Position resolution: 0.02%-100%FS

8. Deformation measurement range: 0.02%—100% FS

9. Stretching space: 1000m

10. Test data recording rate: 400 kHz

11. Test data transmission rate to PC: 500 Hz

12. Maintenance-free AC drive motor

13. Power Supply: AC 220-240V, 60 Hz

14. Machine size: about 560 × 420 × 1650mm (length × width × height).

15. Machine weight: about 150 kg

16. Brand: QINSUN

17. Model: T200

Other supplier products

	Mask Synthetic Blood Penetration Tester	Medical Face Mask Synthetic Blood Penetration Resistance Tester Medical masks synthetic blood penetration tester is used to determine the resistanc...
	Wet leakage current test system of photovoltaic module	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovol...
	Automatic freezing point pour point cold tester	Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f...
	High-precision Material Thermal Conductivity Tester	Introduction It adopts the internationally popular method of heat flow meter to detect thermal conductivity and thermal resistance, and realizes f...
	Coating Wear Resistance Measuring Device	Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met...

供应产品

Same products

	robotic friction stir welding	卖方: World Wide Welding	robotic friction stir welding ROBOTIC FRICTION STIR WELDING Robotic Friction Stir Welding...
	friction stir welding tool	卖方: World Wide Welding	friction stir welding tool FRICTION STIR WELDING (FSW) TOOLS Friction stir welding tool i...
	fsw welded parts supplier	卖方: World Wide Welding	fsw welded parts supplier FRICTION STIR WELDING(FSW) PRODUCTS FSW Welded Parts are compon...
	AI Empowered Embroidery Software	卖方: Zhejiang Maya Mechanical & Electrical Technology Co., Ltd.	AI Empowered Embroidery Software What is ? is a revolutionary image-to-embroidery convers...
	Textile Thermal Insulation Property Tester	卖方: Standard International Group (HK) Limited	Standard GB/T 41560-2022 (China): Specifies thermal resistance testing protocols for protective ...