Drum/Disc Brake Rear Axle
Drum/Disc Brake Rear Axle
Model CH9HB
Nominal Load(Kg) 9000
Wheel Tread(mm) 1860
Max. Troque Output (N.m) 24000
Housing Spec.(mm*mm) 135*145*14
Ratio 3.909、4.10、4.556、4.875、5.125、6.833
Drum Brake Spec.(mm*mm) ∮400*220 Stamping Welding
∮400*180 Casting
Disc Brake Spec 19.5"
Axle Weight(Kg) 600(Drum Brake)500(Disc Brake)
Matching Model 9~10.5M Bus
CH9HB Performance Features
1.Fine Grinding Gear Sets ensure Low Noise.
2.Low Weight, Economic Fuel Consumption.
3.Efficient Drive Unit meets Torque Requirement of Euro IV Engine.
4.Various Ratio makes reasonable Vehicle Motivity.
5.Stamping Welding Structure, most domestic Suspension matchable.
6.Optional Caliper according to different demand (Disc Brake).
7.Optional ASA according to different demand (Drum Brake).
8.Standard ABS enhanced Vehicle Stabilization and Controllability.
9.High Generality of Rear Axle of 9m Bus.
Other supplier products
|
|
T14S2*5 S&T Transmission |
Model T14S2x5
Max. Input Torque (kgf. m/rpm) 149/1200
Gear Ratio 1st L 9.555 L 9.555
H 7.428 H 7.428
2nd L 4.664 L 4.664
H 3.625 H 3.62... |
|
|
Disc Brake Tagging Axle |
Disc Brake Tagging Axle
Model CH75FT
Nominal Load(Kg) 7500
Wheel Tread(mm) 2101
Kingpin Inclination（°） 8°
Caster Angle（°） 3.... |
|
|
Drum/Disc Brake Rear Axle |
Drum/Disc Brake Rear Axle
Model CH15HB
Nominal Load(Kg) 13000
Wheel Tread(mm) 1860
Max. Troque Output (N.m) 45000
Housing Spec.(mm*mm) 1... |
|
|
Drum/Disc Brake Front Axle Ass'y |
Model CH45F
Nominal Load(Kg) 4200~4500
Wheel Tread(mm) 2036(Drum Brake)2074(Disc Brake)
Kingpin Inclination（°） 7°
Caster Angle（°） 0... |
|
|
Drop Center Rear Axle |
Drop Center Rear Axle
Model CH132
Nominal Load(Kg) 13000
Wheel Tread(mm) 1840
Max. Troque Output (N.m) 50000
Housing Spec.(mm*mm) 170*140
Ra... |
供应产品
Same products
