KYN28A-12(Z) indoor Metal enclosed Drawout Switchgear
Type KYN28A-12(Z)/(GZS) indoor metal-enclosed drawout switchgear is mainly used for the electrifying of medium-and-small-sized generator, power distribution of mineral enterprise, electrifying of the secondary generation station of electric system and starting of the large-sized high volt motor to provide control, protection and monitor. This switch cubicle that conforms to IEC62271-200, GB3906-91 has the interlock functions like preventing to push or pull the truck of the circuit breaker with load, close or open the breaker faultily, switch off the breaker when the earthing switch is switched off, enter into the electrified compartment and switch off the earthing switch when it is electrified. D4 vacuum breaker manufactured by ABB company or VS1(ZN63) and VS1+ vacuum breaker manufactured in China are applicable for this cubicle.
Other supplier products
|
|
KYN61-40.5kv Metal clad Movable MV Switch panel |
The enclosure is assembled after bending the aluminum-zinc steel-sheet which connected via high-strength bolts and riveting nuts, with panel spray ... |
|
|
550kV 63kA outdoor type high voltage circuit breaker with motor spring mecanism |
This product is three-phase AC 50Hz outside HV switch, applies to control and protect of 550kV transmission system, and also can be used as circuit... |
|
|
40.5kV 72.5kV 145kV gas insulated Plug And Switch System COMPASS |
ZCW-126/T2000-40 COMPASS, adopting air as arc insulating medium and SF6 gas as the arc control medium, is to be used for the control and protection... |
|
|
XGN15-12 cell type SF6 gas ring main unit RMU |
XGN15-12 cell-type SF6 ring main unit (hereinafter referred as ring main unit), takes SF6 as insulation and arc control medium, and air as insulati... |
|
|
upto 10kV TK-TSC HV Dynamic Var Compensation |
High-pressure TSC dynamic reactive power compensation device consists of fiber trigger control system, valve control system, pulse transformer, rea... |
供应产品
Same products
