DANFOSS OMS orbit motor for fishing-boat

Hydraulic orbit motor BMS

 

BMS series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications.

Characteristic Features:
*Advanced manufacturing devices for the Gerotor gear set which use low pressure of start-up, provide smooth and reliable operation and high efficiency.
*The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications.
*Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.

 

Order Code:
 
Code Remarks
BMS
BMSS 
Displacement
80
100
125
160
200
250
315
375
Flange
E2 2-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3 BMS
E4 4-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3
F6 6-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×2.6
W 4-Ø13.5 Wheel-flange Ø160,pilot Ø125×8
E2B 2-Ø14.3 Rhomb-flange Ø146.05,pilot Ø101.6×9.4
SP 4-Ø11.5 Square-flange Ø106.4,pilot Ø82.5×6.3
D 4-Ø11 Circle-flange Ø125,pilot Ø100×6 BMSS
E 4-Ø13.5 Square-flange Ø127,pilot Ø101.6×6.3
Output Shaft
A Shaft Ø25 , parallel key 8×7×32 BMS
B Shaft Ø32 , parallel key 10×8×45
D Shaft Ø25.4 , parallel key6.35×6.35×25.4
G Shaft Ø31.75,parallel key 7.96×7.96×31.75
F Shaft Ø31.75,splined tooth 14-DP12/24
FD Long Shaft Ø31.75,splined tooth 14-DP12/24
SL shaft Ø34.85,Splined key 6-34.85×28.14×8.64
T1 Cone-shaft Ø35 ,parallel key B6×6×20
T3 Cone-shaftØ31.75,parallel key 7.96×7.96×31.75
S1 Shaft Ø25.4 ,splined tooth SAE 6B
I Sub-shaft Ø22,splined tooth 13-DP16/32
Omit Short shaft 12-DP12/24 BMSS
Port and Drain Port
D G1/2 Manifold Mount 2-M10 , G1/4
M M22×1.5 Manifold Mount 2-M10, M14×1.5
S 7/8-14UNF O-ring manifold 2-3/8-16, 7/16-20UNF
P 1/2-14NPTF manifold 2-3/8-16UNC, 7/16-20UNF
Rotation Direction
Omit Standard
R Opposite
Paint
00 No paint
Omit Blue
B Black
S Silver grey
Unusually Function
Omit Standard
LL Low Leakage
F Free Running
LS Low Speed

 

 

Main Specifications:
Type BMS
BMSE
80
BMS
BMSE
100
BMS
BMSE
125
BMS
BMSE
160
BMS
BMSE
200
BMS
BMSE
250
BMS
BMSE
315
BMS
BMSE
375
Geometric displacement
(cm3 /rev.)
80.6 100.8 125 157.2 200 252 314.5 370
Max. speed (rpm) cont. 800 748 600 470 375 300 240 200
int. 988 900 720 560 450 360 280 240
Max. torque (N·m) cont. 190 240 310 316 400 450 560 536
int. 240 300 370 430 466 540 658 645
peak 260 320 400 472 650 690 740 751
Max. output (kW) cont. 15.9 18.8 19.5 15.6 15.7 14.1 14.1 11.8
int. 20.1 23.5 23.2 21.2 18.3 17 18.9 17
Max. pressure drop (MPa) cont. 17.5 17.5 17.5 15 14 12.5 12 10
int. 21 21 21 21 16 16 14 12
peak 22.5 22.5 22.5 22.5 22.5 20 18.5 14
Max. flow (L/min) cont. 65 75 75 75 75 75 75 75
int. 80 90 90 90 90 90 90 90
Max. inlet pressure (MPa) cont. 25 25 25 25 25 25 25 25
int. 30 30 30 30 30 30 30 30
Weight (kg) 9.8 10 10.3 10.7 11.1 11.6 12.3 12.6

* Continuous pressure :Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute.

 

 

Substitute Reference substance

MOTOR CROSS REFERENCE TABLE
ORBITAL MOTORS
HANJIU
HYDRAULIC
M+S
HYDRAULIC
EATON
CHAR LYNN
DANFOSS ROSS
TRW
WHITE
CROSS
PARKER SAM
BREVINI
BOSCH
RECROTH
BMM MM MLHK J SERIES OMM       BGM MGX
BMP/BM1 MP HP H SERIES OMP DH MF MG WP RS TC TE TB BG MGP GXP
BMR/BM2 MR HR MLHRW,RW S,T SERIES W SERIES OMR DS OMEW MB WR RE TF BR MGR GMR
BMH/BM4 MH MLHH HW HWF   OMH ME RE TG    
BMS/BM5 MS MSY MLHS 2000 SERIES OMS ME RE TG HPR MGS GMS
BMT/BM6 MT MLHT MTM 6000 SERIES OMT TMT MJ     HT MGT,GMT
BMV MV MLHV 10000 SERIES OMV         MGV GMV

 

Hydraulic orbit motor applications:

Brush cutters

Mower

Haveresting equipment

Forestry equipment

Turf equipment

 

The news

EIMA INTERNATIONAL

BOLOGONA,9-13 NOVEMBER 2106

BOOTH NUMBER:18bis-C14

Looking forward to your arrival !

 

Shijiazhuang Hanjiu Hydraulic Co.,Ltd

E-mail:Sales@sjzhjsm.com

Tel:86-311-68123061

Skype:Hanjiu Hydraulic Jamin

Website:www.hjhydraulic.com

Add:15A Block,Zhongyuan Building,Youyi,Street,Shijiazhuang City, China

Factory Add:Dalu Hydraulic Industry Zone,Shijiazhuang,Hebei,China



在线询价

至: Shijiazhuang Hanjiu Hydraulic Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

CBG-F3 GEAR PUMP
CBG-F3 GEAR PUMP
BMP Hydraulic Orbit Motors
BMP Hydraulic Orbit Motors
GPC4 GEAR PUMP
GPC4 GEAR PUMP
BMT Hydraulic Orbit Motors
BMT Hydraulic Orbit Motors
BMRW Hydraulic Orbital Motor
BMRW Hydraulic Orbital Motor
供应产品

Same products

Original PC300-7 excavator hydraulic oil cooler 207-03-71641
Original PC300-7 excavator hydraulic oil cooler 207-03-71641 卖方: JINING YUANYANG CONSTRUCTION MACHINERY CO., LTD can supply komatsu hydraulic oil cooler,radiator for pc200,pc300,pc400 and so on,high quality and...
Excavator PC200-7 Travel motor assy, drive motor 708-8F-00170
Excavator PC200-7 Travel motor assy, drive motor 708-8F-00170 卖方: JINING YUANYANG CONSTRUCTION MACHINERY CO., LTD can supply komatsu travel motor assy for pc200,pc300,pc400 and so on,high quality and best price,...
Butyl Inner Tube Scrap 卖方: K.P. WASTE COMPANY LIMITED
XCMG motor grader GR215,Engine model  6CTAA8.3 6CTA8.3, Rated power 153kW,160kW
XCMG motor grader GR215,Engine model 6CTAA8.3 6CTA8.3, Rated power 153kW,160kW 卖方: QINGDAO TOP RUN INTERNATIONAL TRADE CO.,LTD. Hydraulic transmission controlled by electricity, Working equipment controlled multi valve, short...
XCMG motor grader GR180,Engine model 6CTAA8.3 D6114, Rated power 138kW 140kW
XCMG motor grader GR180,Engine model 6CTAA8.3 D6114, Rated power 138kW 140kW 卖方: QINGDAO TOP RUN INTERNATIONAL TRADE CO.,LTD. Hydraulic transmission controlled by electricity, Working equipment controlled multi valve, short...