NEMA 23 BRUSHLESS DC MOTOR (SQUARE)
NEMA 23 DC Motor(SQUARE)
NEMA 23 (square) shares similar mounting dimensions as NEMA 23 (round) but has much higher torque and power density. Due to the stronger magnet materials adopted, it improves better dynamic performance in the same space.
NEMA 23 BRUSHLESS DC MOTOR (SQUARE) CHARACTERISTIC PARAMETER
|
RATED VOLTAGE |
30 VDC |
|
RATED OUTPUT POWER |
30 W |
|
POLES NUMBER |
8 |
|
PHASE NUMBER |
3 |
|
RATED ROTATIONAL SPEED |
3500 RPM |
|
OPEN LOOP IDLE SPEED |
4000 RPM±10% |
|
RATED TORQUE |
|
|
RATED CURRENT |
|
|
VOLTAGE COEFFICIENT |
|
|
PH RESISTANCE |
|
|
PH INDUCTANCE |
|
|
DIELECTRIC STRENGTH |
500V A.C/MINUTE |
|
INSULATION CLASS |
CLASS E(120℃) |
|
ROTOR INERTIA |
|
|
WEIGHT |
|
|
ALLOWABLE THRUST LOAD |
15N |
|
ALLOWABLE RADIAL LOAD |
75N(ON THE SHAFT END) |
|
OPERATE AMBIENT TEMP. |
-20°C----+50°C |
|
OPERATION AMBIENT HUM. |
15%----90% |
|
LIFE |
5000 HOURS |
If you want to know more stepper motor working principle, please visit our website.
Now the price of stepper motoris affordable, if you have needs, please leave us a message.
在线联系供应商
Other supplier products
 |
HORIZONTAL FORM FILL SEAL MACHINE | The horizontal form fill and seal machineis an automatic continuous shrinkage packaging equipment, which is characterized by the fast temperature r... |
 |
LEAD SCREW MOTOR & LINEAR SLIDES | Lead screw stepper motorare also known as linear slide motor, which produces a linear force along its length. This featured through type lead screw... |
 |
MOTOR ENCODER | Encoders are mainly used to feedback on the closed-loop system such as motor running position and winding number. Common encoders are divided into ... |
 |
NEMA 8 LEAD SCREW MOTOR | NEMA 8 linear actuator NEMA 8 stepper motor with lead screwis our smallest one, which can be deployed in some very narrow spaces. The lifetim... |
 |
HORIZONTAL FFS COOKIE WRAPPING MACHINE | Guonuo's horizontal FFS cookie wrapping machine, cookie packaging machine, cookies filling machineis controlled by an inverter. It is very suitable... |
