KRD15 PNEUMATIC HORIZONTAL SHOCK RESPONSE SPECTRUM TEST SYSTEM
KRD15 pneumatic horizontal shock response spectrum tester is the special equipment for spectrum specification shock test, so it can also be called spectrum specification shock machine. The advantages of this equipment are convenient energy adjustment, simple and compact structure, easy operation, and a good repeatability of test results. It is the state-of-the-art shock response spectrum tester, using compressed gas energy to provide impact energy, and the shock hammer is pushed to impact the resonance plate to produce high-energy impact. It can meet the requirements of various spectrum specifications established by the current aerospace system, mainly applied in the industries of aerospace, aviation, and ships.
FEATURES OF KRD15 PNEUMATIC HORIZONTAL SHOCK RESPONSE SPECTRUM TESTINGSYSTEM
Adopts pneumatic energy storage to drive the shock hammer, with a large driving force, reliable structure, and fast response speed
Adjust the driving shock energy by adjusting the air pressure, which is easy to operate and high in efficiency
Two-level safety switch is designed to fully protect the safety of operators
Designed with a special base, is mainly to raise the installation position of the response plate, which is convenient for users to install the specimen and adjust the gasket operation
All operations are completed on the integrated measurement and control software, which is easy to use and has a high degree of automation
TECHNICAL SPECIFICATIONS OF KRD15 PNEUMATIC HORIZONTAL srs shock response spectrumTEST SYSTEM
Come and get mechanical test equipment.
TABLE OF KRD15 PNEUMATIC HORIZONTAL SHOCK RESPONSE SPECTRUM TEST SYSTEM
The main structure of the shock response spectrum tester mainly includes a test machine table, a shock response spectrum control measurement analysis system, etc.
KRD15 pneumatic horizontal shock response spectrum tester mechanical system consists of a shock table, a response plate, a pneumatic self-locking mechanism, a pneumatic return device, etc.
The specimen is installed on the response plate of the horizontal shock response spectrum tester. When the shock hammer shocks the response plate, the specimen on the response plate produces the corresponding move after the shock is applied. The acceleration sensor collects the acceleration on the response plate and performs the response spectrum analysis.
ACTUAL PHYSICAL SYSTEM IS DIVIDED INTO MULTIPLE SINGLE DOF SYSTEM PHYSICAL MODELS
An actual physical system can be decomposed into multiple different single-DOF systems. For each single-degree-of-freedom system, analyze and calculate the shock response spectrum, and finally synthesize it to get the shock response spectrum of the entire system, as shown in Figure 1 below.
在线联系供应商
Other supplier products
KRD102 Clamping Force Tester | KRD102 series clamping force testeris newly developed multi-functional economical carton quality inspection equipment, mainly used for household ap... | |
KRD16 HIGH IMPACT SHOCK TEST SYSTEM | KRD16 series shock test system is a standard testing machine stipulated by the high impact shock test method and meets MIL-S-901D standard which co... | |
KRD102 Clamping Force Tester | KRD102 Clamping Force Tester KRD102 series clamp force testeris newly developed multi-functional economical carton quality inspection equipment, m... | |
KRD12 PNEUMATIC HORIZONTAL SHOCK TEST MACHINE | KRD12 series shock tester is a pneumatic cylinder driving horizontal shock/bump testing machine with the advantages of ingenious design, high techn... | |
KRD100 Incline Impact Tester | KRD100 Incline Impact Tester KRD100series incline impact tester is a testing machine that evaluates the ability of loads to withstand inclined imp... |
Same products
CNC Machining Material | 卖方: YS RAPID MANUFACTURING LIMITED | China CNC Machining Factory--Custom Metal CNC Parts, Plastic CNC Parts, Sheet Metal Fabrication M... | |
CNC Machining Copper | 卖方: YS RAPID MANUFACTURING LIMITED | With extensive production experience, YS Rapid offers copper cnc machining service and copper mac... | |
CNC Machining Brass | 卖方: YS RAPID MANUFACTURING LIMITED | Brass is an object made of an alloy of copper and zinc. The melting point of brass with a copper ... | |
CNC Machining Aluminum | 卖方: YS RAPID MANUFACTURING LIMITED | We produce almost any form of product for our customers. Our company provides aluminium cnc machi... | |
CNC Machining ABS | 卖方: YS RAPID MANUFACTURING LIMITED | Machining ABS material is an abbreviation for acrylonitrile-butadiene-styrene copolymer board, an... |