super micro mill

SCM Series Super-micro Mill is on the bases of our company's 15 product experience.By plenitude review, investigation and try on 12 kinds mill and horizontal crusher, by time after time investigation an experience empolder high efficiency and low cost super thin mill.

 

Future:

  1. High-efficiency

   In the same condition of finished particles size and the powder of electromotor,the output is 40% high than airflow mill and whish mill.

  1. High-using rate

   In the same condition of material and finished particles size, the use of abrasion is long than impact crusher and turbine crusher. Commonly about one year.

2. High dependability

   Because it hasn't axletree and bolt in the antrum, so it can't become flexible.

3. The product thin degree is high.

   The thin degree can achieve d97<5 um

4. Environment it will lighten pollute and noise form using dust catcher and muffler, achieve our country require and protecting ambiance.

 

Application:

SCM Series Super-micro Mill is a equipment which produces thin powder and super thin powder, be applicable middle and low rigidity. It can product powder form various non-flammable and non-explosive minerals with Mohs' hardness below 6, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnesite, meerschaum, barite, gypsum,alunite,graphite,fluorite, floatstone,etc.

Technical parameter:

  SCM6015 SCM8021 SCM11027
Roller (Num) 15 21 27
Diameter (mm) 600 800 1000
Ring (Num) 1 1 1
Main speed (r/min) 235 235 235
Fed size (mm) <10 <10 <10
Output (mesh) 325-2500 325-2500 325-2500
Output (kg/h) 350-2500 600-4000 900-6000
Outside dimension(m) 10*2*5.5 12.4*2.5*5.8 14.5*3.8*6.3
Note: This specification is just reference, any changes are subject to the High pressure micronizer.


在线询价

至: 上海建冶重工机械有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Роторная дробилка PF1214
Роторная дробилка PF1214
jaw crusher
jaw crusher
Новая высокоэффективная энергосберегающая ударная дробилка
Новая высокоэффективная энергосберегающая ударная дробилка
Конусная мельница YM5055
Конусная мельница YM5055
Конусная дробилка
Конусная дробилка
供应产品

Same products

滑撑自动组装机
滑撑自动组装机 卖方: 深圳市泽宇智能工业科技有限公司 机器参数: 型号:YJ-ZY11-01 产能: 10-15pcs/min 电源: AC380V 50Hz 气压: 0.5-0.8Mpa 重量: ...
底座自动攻牙机
底座自动攻牙机 卖方: 深圳市泽宇智能工业科技有限公司 型号:C01-ZY03-01 产能: 20-25pcs/min 电源: AC380V 50Hz 气压: 0.5-0.8Mpa 重量: 1000KG 尺寸:1200*...
执手配件自动组装机
执手配件自动组装机 卖方: 深圳市泽宇智能工业科技有限公司 机器参数: 型号:ZEUEE-D08-ZY04-01 产能: 20-25pcs/min 电源: AC380V 50Hz 气压:0.5±0.1Мпa 重量: 40...
传动器半自动组装机
传动器半自动组装机 卖方: 深圳市泽宇智能工业科技有限公司 机器参数: 型号:C01-ZY3003-003 产能:20-25pcs/min 电源: AC380V 50Hz 气压: 0.5-0.8Mpa 重量: 2000KG ...
齿轮盒自动攻牙机
齿轮盒自动攻牙机 卖方: 深圳市泽宇智能工业科技有限公司 机器参数: 型号:D13-ZY06-01 产能: 20-25pcs/min 电源: AC380V 50Hz 气压:0.4-0.6Mpa 重量: 200KG 尺寸: ...