New Material Grinding Ball

适用于直径大于2500毫米的球磨机。

选用高碳合金钢、特钢,采用斜底加热炉加热锻造工艺,达到心部和表面硬度一致。

锻制钢球的优势:

1、破碎率低,含合金元素配比合理,整体性能稳定,含气很少不易出现空洞,淬火工艺流程控制严格,适合高产量,大型磨机使用效果明显;

2、比重稍大于铸球,冲击破碎、剪切力大,提高产量明显,但对磨机衬板影响很小;

3、硬度均匀(芯表差距1-2HRC)性好,失圆率低,耐磨性高;

4、外观圆度好,无外观缺陷;

5、组织致密,性价比高,节约成本明显;

6、环保,不污染水源。



在线询价

至: Hebei Goldpro New Materials Technology Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

New Material Grinding Ball
New Material Grinding Ball 适用于直径大于2500毫米的球磨机。 选用高碳合金钢、特钢,采用斜底加热炉加热锻造工艺,达到心部和表面硬度一致。 锻制钢球的优势: 1、破碎率低,含合金元素配比合理,整体性能稳定,含气很少不易出现空洞,淬火工艺流程控制严格,适合高产量,大型磨机使用效果明显; 2、比重稍大于铸球,冲击破碎、剪切...
供应产品

Same products

IC697CMM742 Programmable Control Products TCP/IP Ethernet Communications for the Series 90 PLC
IC697CMM742 Programmable Control Products TCP/IP Ethernet Communications for the Series 90 PLC 卖方: N.S.E. Automation Co.,Ltd IC697CMM742 Programmable Control Products TCP/IP Ethernet Communications for the Series 90 PLC IC...
GE FANUC IC697PWR711 Power Supply Module, 100W, 120/240 VAC or 125 VDC
GE FANUC IC697PWR711 Power Supply Module, 100W, 120/240 VAC or 125 VDC 卖方: N.S.E. Automation Co.,Ltd GE FANUC IC697PWR711 Power Supply Module, 100W, 120/240 VAC or 125 VDC GE FANUC IC697PWR711 Power...
GE FANUCIC697CPX772 96 MHz 32-Bit Point 512 Kbyte (Slow) Memory Central Processing Unit
GE FANUCIC697CPX772 96 MHz 32-Bit Point 512 Kbyte (Slow) Memory Central Processing Unit 卖方: N.S.E. Automation Co.,Ltd GE FANUCIC697CPX772 96 MHz 32-Bit Point 512 Kbyte (Slow) Memory Central Processing Unit GE FANUCI...
GE FANUC IC697BEM731 Series 90-70 Genius I/O Bus Controller
GE FANUC IC697BEM731 Series 90-70 Genius I/O Bus Controller 卖方: N.S.E. Automation Co.,Ltd GE FANUC IC697BEM731 Series 90-70 Genius I/O Bus Controller GE FANUC IC697BEM731 Series 90-70 Gen...
GE FANUC IC698CHS117 RX7i 17Slot Rack Front Mount NEW AND ORIGINAL FOR WARRANTY
GE FANUC IC698CHS117 RX7i 17Slot Rack Front Mount NEW AND ORIGINAL FOR WARRANTY 卖方: N.S.E. Automation Co.,Ltd GE FANUC IC698CHS117 RX7i 17Slot Rack Front Mount NEW AND ORIGINAL FOR WARRANTY GE FANUC IC698CHS...