Wrapped Bronze Bushing With Through Holes TSB-092
Wrapped bronze bushing with through holes TSB-092STRUCTURE: Bronze bearings made of CuSn8 with through-holesMICROSECTION: CuSn8 with composition (Sn:8%,Website:, P<0.05%, Cu:Rest)TECHNICAL DATA:Max. Load PStatic120 N/mm2Dynamic40 N/mm2Max. sliding speed V(m/s)2.5 m/sMax. PV factor (N/mm2.m/s)2.8 N/mm2.m/sOperating TemperatureMax. Greased150°C Max. Oil lubricated250°C Coefficient of friction0.06~0.15μSurface roughness (Ra)≤ 0.8 µmSurface hardnessNormal>200 HBFor longer service life>350 HBCHARACTERISTICS:Bearing material CuSn8 made of solid bronze strip with perforation for lubricated applications.Good wear resistance, suitable for rough conditions.Optimum performance under relatively high loads and low speeds.These holes will allow greater capacity to collect lubricant, which build up a lubrication film at the start of movement and reduce the frication.TYPICAL APPLICATIONS: Wrapped bronze bushing with through holes TSB-092 is suitable for high load, lower speed application like construction, transport and agriculture machinery etc.
Other supplier products
|
|
POM coated self-lubricating plain bearing TSB-20STRUCTURE: Metal-Polymer Composite Bushing Material COMPOSITION: Steel Back + Porous Bronze Sinter ... |
|
|
Lead free self-lubricating DU bushing TSB-1XSTRUCTURE: Metal-Polymer Composite Bushing Material COMPOSITION: Steel Back + Porous Bronze Sinter + PT... |
|
|
Hydraulic pump special DP4 bushings TSB-1DSTRUCTURE: Metal-Polymer Composite Bushing Material COMPOSITION: Steel Back + Porous Bronze Sinter + PTFE... |
|
|
Bronze self-lubricated plain bearing TSB-090STRUCTURE: Bronze bearings made of CuSn8 with lubrication indentsMICROSECTION: CuSn8 with compositio... |
|
|
Shock absorber bushing with Pb-free TSB-1PSTRUCTURE: Metal-Polymer Composite Bushing Material COMPOSITION: Steel Back + Porous Bronze Sinter + PTFE... |
供应产品
Same products