Inconel X750
We are leading manufacturer and stockist of Inconel X750 in China.Inconel X750 Technical Data Sheet Inconel X750 Chemical Composition LimitsWeight %Ni +(Co)CrFeTiAlNb + (Ta)MnSiSCuCCoX-750
UNS N0775070 min14-175-92.25-2.750.40-1.00.70-1.21 max0.50 max0.01 max0.50 max0.08 max1 maxUNS N07752 is available in billets for forging. UNS N0772 has limits of 0.05% on both Carbon and CobaltInconel X750 is a nickel-chromium alloy which has been made precipitation-hardenable by the additions of aluminum and titanium. Inconel X750 has good resistance to corrosion and oxidation along with high tensile and creep rupture properties at temperature up to 1300ºF (700ºC). Due to X-750's excellent relaxation resistance it is useful for applications as high-temperature springs and bolts,Website:, X-750 is also used in gas turbines, rocket engines, nuclear reactors, pressure vessels, tooling and aircraft structures.Inconel X750 Mechanical PropertiesMaterialSizeUltimate
Tensile Strength ksiYield Strength (0.2% Offset) KsiElongation in 4D(%)% Reduction of AreaAlloy X-750 BarUnder 4.0"165.01052025Alloy X-750 Bar4.0 " and over1601001517Properties as described in AMS 5667 which requires that material following 1625°F/24 hrs, AC-Equalising + precipitation treatment have the following minimum room temperature properties. Hardness will lie in the range of 302-363 BHNRod, Bars and Forgings are available with the following heat treatments
AMS 5667 - 1625°F/24hr, AC + 1300°F/20 hr, AC (Equalising plus precipitation treatment). AMS 5667 Rod, Bars and Forgings have high strength and notch rupture ductility up to 1100°FAMS 5668 - 2100°F anneal + 1550°F/24 hr, AC, +1300°F/20hr, AC (triple heat treatment). AMS 5668 has maximum creep, relaxation and rupture strength above about 1100°F. AMS 5670 - 1800°F anneal + 1350°F/8hr, FC to 1150°F. Hold at 1150°F for total precipitation-treating time 18 hr, AC (solution treatment plus furnace cool precipitation treatment). Due to the heat treatments AMS 5670, AMS 5671 and AMS 5747 have increased tensile properties and reduced heat treatment time service up to about 1100°F.With a heat treatment of 1800°F anneal + 1400°F/1hr, FC to 1150°F, hold at 1150°F for total precipitation-treating time of 6 hr, AC (solution treatment plus short furnace-cool precipitation treatment). This treatment of short furnace cool aging achieves only slightly lower properties than does AMS 5670 and AMS 5671. Rods and Bars X-750 is available from 1/2" diameter to 6" diameter in 1/4" increments. From 6" diameter to 10" diameter it is available in 1/2" increments.
MaterialSizeTensile Strength ksiYield Strength (0.2% Offset) KsiElongation in 2"(%)% Hardness RcAlloy X-750 Sheet
Annealed Condition0.010 to 0.024", incl140 max-30 min-Alloy X-750 Sheet
Annealed Conditionover 0.024 - 0.125" incl130 max60 max40 min-Alloy X-750 Sheet
Annealed Conditionover 0.125 - 0.250 incl130 max65 max40 min-Alloy X-750 Sheet
After Precipitation Treating (1300°F/20hr, A.C)0.010 to 0.025 incl165 min105 min20 min32 minAlloy X-750 Plate
After Precipitation Treating (1300°F/20hr, A.C)0.187 to 4.000, excl155 min100 min20 min30 minSheet, Strip and Plate are available with the following heat treatments
AMS 5542 - 1300°F/20hr, AC (Constant-temperature precipitation treatment). AMS 5542 has high strength up to 1300°F
AMS 5598 - 1350°F/8hr, FC to 1150°F, hold at 1150°F for total precipitation-treating time of 18hr, AC (furnace-cool precipitation treatment. AMS 5598 has high strength up to 1300°F (Increased tensile properties to about 1100°F).With heat treatment 1400°F/1hr, FC to 1150°F hold at 1150°F for total time of 6hr, AC (short furnace-cool precipitation treatment).
MaterialTensile Strength ksiYield Strength ksiElongation in 4D(%)% Reduction of AreaHardnessInconel X750
N07752 Type HRCAlloy X-750 Heat Treatment - Solution Treat 1.2 hrs @ 1975°F and Air Cool
Precipitation Heat Treat 20 hrs @ 1320°F and Air CoolUNS N07752 is available in billet for forging. UNS N07752 has limits on the Carbon and Cobalt levels (each has a maximum of 0.05%). Inconel X750 SpecificationsRodASTM B 637, ASME SB 637, ISO 9723, ISO9724, ISO9725, AMS 5667, AMS 5668, AMS 5669, AMS 5670, AMS 5671, AMS 5747, EN10269BarASTM B 637, ASME SB 637, ISO 9723, ISO9724, ISO9725, AMS 5667, AMS 5668, AMS 5669, AMS 5670, AMS 5671, AMS 5747, EN10269Forging StockASTM B 637, ASME SB 637, ISO 9723, ISO9724, ISO9725, AMS 5667, AMS 5668, AMS 5669, AMS 5670, AMS 5671, AMS 5747, EN10269PlateISO 6208, AMS 5542 and AMS 5598SheetISO 6208, AMS 5542 and AMS 5598StripISO 6208, AMS 5542 and AMS 5598WireBS HR 505, AMS 5698, AMS 5699OtherUNS N07750, W.Nr 2.4669, Inconel X750 (tradename), UNS N07752The Inconel X750 items which we can manufacture and supply are the followings.
Inconel X750 Rod
3D printing spherical powder Inconel X750
Inconel X750 Rings
Inconel X750 Forgings
Inconel X750 pipe
Inconel X750 tube
Inconel X750 bars
Inconel X750 plates
Inconel X750 sheets
Inconel X750 Strip
Inconel X750 wire
Inconel X750 fitting Union
Inconel X750 Pipe Elbows
Inconel X750 PIPE Tee
Inconel X750 ADAPTERS
Inconel X750 pipe bend
Inconel X750 reducers
Inconel X750 fitting caps
Inconel X750 pipe outlets
Inconel X750 Stub Ends
Inconel X750 Couplings
Inconel X750 pipe Nipples
Inconel X750 BUSHINGS
Inconel X750 pipes sockets
Inconel X750 Pipe Gasket
Inconel X750 pipe joints
Inconel X750 pipe Cross
Inconel X750 Pipe Wyes
Inconel X750 seal ring
Inconel X750 Flange
Inconel X750 bolts
Inconel X750 nutsONE OF THE KIND, MILLIONS OF CHOICES SUPERIOR QUALITY PROMPT DELIVERY FAVORABLE FEEDBACK ALL AVAILABLE IN PESCO SELECT PESCO, YOU WILL BE RIGHT For more info and price of Inconel X750, please send us inquiry and you will have quick reply soon.
Other supplier products
|
|
|
We are leading manufacturer and stockist of BS S510 in China.Non-Corrosion Resisting Steel S510 BS S510 Technical Data SheetBS S510 Chemical Compos... |
|
|
|
Petrol Steel Co.,Ltd is a professional cra clad lined pipe fittings technical clad pipe fittings manufacturer supplying you with customized cra cla... |
|
|
|
We are leading stockist of Tantalum in China.Capacitor grade Tantalum Powder
The company produces FTW series sodium-reduction tantalum powder,We... |
|
|
|
API 5CT STEEL PIPES casing pipes OCTG oil country tubular goods We are leading manufacturer and stockiest of API 5CT STEEL PIPES CASING PIPES OCTG ... |
|
|
|
We are leading manufacturer and stockist of DRIVESHAFT TUBING in China.specifications of DRIVESHAFT TUBING:Meets ASTM A 513 Type 5Stocked Size rang... |
供应产品
Same products
