PTFE Molding Powder
PTFE Molding PowderMain Technical PropertiesFT-4TMFT-4TN-SAppearanceWhite powder, no impuritiesTensile strength (Mpa)≥36≥35.0Elongation at break %≥320≥320Bulk density (g/LAverage particle size (μm)30±5S.S.G.2.13-2.19Melting point (℃)327±5Thermal instability index≤30 (℃)Electric strength (MV/m)≥100≥80ProcessingMoldingApplicationFilm, rod, tube, sheet, sealing materialPackingSealed in PVC bags, packed in paper barrel.Packing, Storage & Transportation• λ Packed with sealed PVC bag, load in waterproof paper barrel. The net weight is 20+0.1kg per barrel.• λ Not classified as hazardous for transport. During transportation and storage, avoid heavy shaking, and prevent from heating.• λ It should be stocked in clean, cool and dry warehouse, prevent from agglomeration and contamination.
Other supplier products
|
|
FKM PowderPolymer Processing Additives (PPA)FKM powder is one kind of Fluoroelastomer with shape of powder; it could be used as polymer processing ... |
|
|
PVDF Extrusion Grade FTH-212 Characteristic Physical properties Specification ASTM Test standard MFR(g/10min)5~10ASTM D1238, 2300C/5kgAppearanceWhi... |
|
|
1,3,3,3-Tetrafluoropropene(HFO-1234ze) is a hydrofluoroolefin. It was developed as a "fourth generation" refrigerant to replace R134a and as a blow... |
|
|
R410AR410a is a colorless gas under ordinary temperature, and a colorless & Transparent Liquid under the pressure of itself, mixed by HFC-32 and HF... |
|
|
PVDF Injection Grade FTH-211 Characteristic Physical properties Specification ASTM Test standard FTH-211A FTH-211B FTH-211C MFR(g/10min)10~1515... |
供应产品
Same products