PVDF Injection Molding Grade

PVDF Injection Grade FTH-211 Characteristic Physical properties Specification ASTM Test standard   FTH-211A  FTH-211B FTH-211C  MFR(g/10min)10~1515~2020~25ASTM D1238, 2300C/5kgAppearanceWhite and semi-transparent pellets/Density(g/cm3)1.77~1.79ASTM D792, @23/230CWater absorption (%)≤0.05ASTM D570Mechanical properties Tensile yield strength(Mpa)≥40ASTM D638 50mm/min@230CYield elongation (%)5-15Tensile strength(Mpa)≥30Elongation at break (%)≥30Hardness(Shore D)70-80Thermal properties Melting point(0C)165~175ASTM D3418,100C/minProcess safety instructions λ This product should be processed under 370℃,to avoid producing toxic gases;λ PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds;λ Operators should take good care of personal protection during the use procedure and processing.Packaging and storage λ PVDF is sealed in plastic bag with 25kg net weight per bag and then put into drum or cardboard.λ It must be stored in clean, cool, dry place.


至: Zhejiang Fotech International Co., ltd
Your E-mail:

Send to other suppliers

Other supplier products


Same products

卖方: HT Filtration Equipment Co., Ltd
卖方: HT Filtration Equipment Co., Ltd
卖方: HT Filtration Equipment Co., Ltd
卖方: HT Filtration Equipment Co., Ltd
HDPE electrofusion fitting
HDPE electrofusion fitting 卖方: Chengdu Chuangrong Trading Co.,Ltd   цвет: черный, желтый или по заказу размер: проверяйте ниже бланк соединительный спосо...