Heat-strengthened Glass for building
Heat-strengthened Glass
Product Description
|
Glass type |
Heat-strengthened glass better for Laminated glass |
|
Color |
Euro Grey, Dark Grey, Grey, French Green, Dark Green, Blue, Ultra Clear, Clear etc. |
|
Thickness |
3mm 4mm 5mm 6mm 8mm 10mm 12mm |
|
Size |
Customer demand ( maximum size: 2440mm×6400mm; minimum size:200mm×300mm) |
|
Edge type |
Polished edge |
|
Quality Certificate |
EN12150 , BS6206 , ISO9001 , ROHS , REACH |
|
Payment term |
TT ,L/C, Western union |
|
Shape |
Rectangle shape , irregular shape |
|
application |
Building facades, office buildings, public places, houses eta. |
Tempered Glass, Heat Strengthened Glass, Facade Glass, Curtain wall GlassExport China
Product Introduction
Heat-strengtened glass (HSS) has the same production method as tempered glass, that is to heat up the glass to the softening point nearby, then rapidly cooled down. During the instant cooling procession, cooling rate caused by wind pressure is slower than tempered glass, therefore, temperature variance between intermediate level and superficial level is relatively smaller, stress is relatively smaller accordingly.
Heat Strengthened GlassProduct Features
High intensity:Mechanical strength of heat-strenghtened glass is as 1.5-2 times as annealed glass.
Thermal ability:Variance of the heat-strenghtened glass heat resistant is as high as 130℃-170℃, which can fully withstand the impact of temperature difference on middle glass and side glass from intense solar, keeping unbroken
Prevention from self destruction:Compared with tempered glass, Self Destruction would not happen to heat-strenghtened glass, which is its biggest advantage.
Stress residue:When heat-strenghtened glass is destructed, its special stress structure enables fragments maintain in the frame, unlike tempered glass that will become particle falling down. This advantage of heat-strenghtened glass saves much time when doing replacement of glass. And after being destructed, every fragment remains a certain residual stress.
High degree of plainness:Compared with tempered glass, because of small cooling stress and slow cooling rate during production, degree of plainness of heat-strenghtened glass is close to annealed glass but far surpasses tempered glass.
Product Application
Widely used in curtain glass wall, greenhouse, internal partition, especially suitable for compound laminated glass.
Range of color
Transparent glass, tinted glass like green, blue, grey, dark brown, tempered heat-reflective coated glass, Low-E glass and compound insulated, laminated glass.
Quality
In accordance with Chinese standard GB17841-1999《tempered and heat-strengthened glass used in curtain walls》.
In accordance withJapanese standard JISR 3222.
在线联系供应商
Other supplier products
 |
Heat-reflective Glass | Heat-reflective Glass Product Description Glasstype Acidetched glass,Silkscreenglass,Digitalprinted glass,Spray Paintedglass, Frost... |
 |
Acid etched glass for building | Acid etched glass Product Description Glass type Tempered glass Color Customizable Thickness 3mm,4mm,5mm... |
 |
Laminated insulating glass | Laminated insulating glass Product Description Glass type Tempered insulated glass laminated glass Color Customer dema... |
 |
Self-cleaning Glass | Self-cleaning Glass Product Description Glass type Tempered glass Color Clear Transparent Thickness 6mm~... |
 |
Enameled Glass Color Glazed Tempered Glass - Ceramic Glass | Enameled GlassColor Glazed Tempered Glass - Ceramic Glass Product Description Glass type Tempered glass , Silkscreen priting before ... |
