Fuel Injectors
Auto fuel injector, is a part that injects fuel into the engine cylinder. It also is a simple solenoid valve. When the solenoid coil is energized, the suction force is generated, the needle valve is sucked up, the nozzle hole is opened, and the fuel is ejected at a high speed through the annular gap between the needle and the nozzle hole at the head of the needle valve, forming mist and is conducive to full combustion.
The car fuel injectoritself is a normally closed valve, that is when no control signal is input, the valve is always closed. While the normally open valve is when there is no input control signal, the valve is always open, and a valve needle moves up and down to control the valve opening and closing. When the engine ECU sends a fuel injection command, its voltage signal will cause the current to flow through the coil in the car injectorto generate a magnetic field to suck up the valve needle, so that the valve can be opened and the fuel can be ejected from the fuel injection hole.
The biggest advantage of fuel injectorsproduced and sold by MAPMS is that the fuel supply control is very precise so that the automobile fuel system can have the correct air-fuel ratio in any state, which not only keeps the engine running smoothly, but also the exhaust gas can meet the specification of environmental regulations.
Fuel Injectors Features
Strong self-cleaning ability, the nozzle holes are not easy to deposit carbon and block.
High performance of injection characteristics with good injection angle and good atomization effect.
Easy to clean.
What Are the Symptoms of a Bad Fuel Injectors?
Engine Jitter
When the fuel injector is damaged and the fuel injection is not smooth, the engine will have symptoms such as running jitter during the working process.
Power Drop and Fuel Consumption Increase
Once fuel injector is damaged, the fuel injection amount and fuel injection pressure cannot be guaranteed, which will cause the symptoms of vehicle power drop and fuel consumption increase.
Increased Exhaust Emission Pollution
The failure of fuel injector will inevitably affect the mixing and combustion of combustible gas mixtures, which will result in an increase in vehicle exhaust emissions.
Difficulty Starting or Even Stalling
If the fuel injector is seriously damaged, the vehicle will have difficulty in starting, or even suddenly stall during driving.
The Engine Lacks Cylinders
If the fuel injectors of individual cylinders are seriously damaged, the engine is very likely to have cylinder shortages, which will cause the engine to shake violently.
Black Smoke from Car Exhaust
As the damage of the fuel injector, the atomization of fuel and the mixing with air cannot be guaranteed, so the combustible mixture cannot be completely burned, resulting in black smoke from the vehicle.
For more information about car fuel injection system, please feel free to contact us!
If you need any kinds of car auto spares, please contact us, as one of the most professional car spares suppliers, MAPMS is willing to offer you high quality products.
在线联系供应商
Other supplier products
 |
Ignition Coil Rubber Boots | MAPMS supplies car rubber boots for COP and pencil ignition coils, which is made of high-quality silicone, and with withstand high pressure over 40... |
 |
Vehicle Speed Sensors | As the information source of the automotive electronic control system, the vehicle speed sensor is the key component of the automotive electronic c... |
 |
Power Window System for Car | One is a master switch, which can be controlled by the driver to lift the glass of each power window system for car the other is a sub-switch, whic... |
 |
Distributor Ignition Coils | An ignition system with a distributor generates high-voltage electricity from an ignition coil, and the distributor distributes the high-voltage el... |
 |
Pencil Ignition Coils | The Pencil Type Ignition Coil combines the high-voltage ignition wire and the ignition coil into one, which reduces energy loss, and improves combu... |
Same products
 |
PCB Assembly Service | 卖方: Shenzhen Qingjian Electronic Technology Co., Ltd | PCB Assembly Service Product Description We have 5 SMT (Surface Mount Technology) production li... |
 |
PCB design | 卖方: Shenzhen Qingjian Electronic Technology Co., Ltd | PCB design Product Description We can provide various types of PCB board designand production, ... |
 |
PHILIPS LED Strip HLS288 | 卖方: BMT LIGHTING | PHILIPS LED Strip HLS288 Plus 11.5W 4000K 30M IP20 Product date: Model Name:PHILIPS LED StripH... |
 |
PHILIPS OEM LED Street Light | 卖方: BMT LIGHTING | PHILIPS OEM LED Street Light BMT-BST10D Heat Sink Outdoor Ip65 Waterproof 50w 120w 180w 240w Led ... |
 |
PHILIPS Ultinon LED | 卖方: BMT LIGHTING | PHILIPS Ultinon LED Headlight bulb S25 12V 5W 11499ULWX2 BA15s Product description PHILIPS Ult... |
