MTP/MPO LOOPBACK
T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP/MPOloopback adaptercan transmit the optical network signal from the transmitter to the receiver, thereby forming the optical signal receiving and transmitting loop. MTP / MPO fiber loop provides a fast and efficient way to test the transmission capacity and receiving sensitivity of optical network equipment. T & S MTP / MPO fiber loop has 8F, 12F, 16F, 24F, 32F channels with low loss and conventional loss, single-mode and multi-mode options. Our MTP/MPO loopback adapter is now widely used for optical communications products self-test, network diagnosis, and test, etc.
Features of MTP/MPO Loopback Adapter
Available in various polarity and fiber types
Meet TIA/EIA and IEC interpretability standards
RoHS compliant
Customized attenuation available
Available with or without Pull tabs
8F , 12F, and 24fF available
Specifications of MTP/MPO Loopback
MTP Loopback with Housing and Pull-tab
The MTP loopback adapter occupies both ends of fiber in a duplex connector or a multi-fiber connector. This MTP lookback with housing and pull-tab can provide an effective solution so as to test the emission ability of the network equipment and receive sensitivity. Especially in 40/100G network communication, our MTP loopback devices can achieve optical fiber network in pairs on a single element or interface and conduct effective tests and evaluation of the Internet through back signal positioning.
MTP/MPO Lookback Adapter Applications
MTP®/MPO Loopback Adapter is used widely in testing applications within parallel optical 40Gbps and 100Gbps networks. The MTP loopback adapters enable verification and test of transceivers with MTP®/MPO interface like 40Gbps BASED SR4 QSFP+. MTP loopback adapters are developed to connect transceivers and a receiver port of the MTP®/MPO transceiver interface. MTP®/MPO loopback adapters do a great help in speeding up IL test of optical networks section by connecting them to an MTP®/MPO trunk.
在线联系供应商
Other supplier products
 |
MTP®/MPO LOOPBACK Adapter | T & S MTP® / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-desig... |
 |
PLC CHIP | PLC CHIP As a professional plc splitter manufacturer, T&S provides a wide range of different fiber optic components at reasonable prices. Based... |
 |
SFP28 25G LR | T&S TSSP-3125G-LR is a single-Channel, Pluggable, Fiber-Optical SFP28 for 25 Gigabit Ethernet Applications. It is a high-performance module for... |
 |
QSFP28 100G CWDM4 2K | The 100g qsfp28 er-CWDM4-2km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for high port-count 100G... |
 |
BAND SEPARATOR WDM DEVICE | T&S BWDM 3 Ports Device is a kind of FWDM device that can separate C-band and L-band or split C-band into two parts, or split L-band into two p... |
Same products
 |
KYN28-12 Metal-clad indoor movable switchgear | 卖方: Jiangsu Aokai Electric Co., Ltd | KYN28-12 indoor communication metal armoured open switchgear(hereinatter referred to as the switc... |
 |
MTUB43-90511B-12A20 Mini USB Female Connector | 卖方: MTCONN ELECTRONICS CO.,LTD | This model is a Mini USB R/A T/H DIP female connectorthat complied with RoHS certificate. It adop... |
 |
Radar RD03 | 卖方: Xi'an Interwiser Electronic Technology Co., Ltd | The RD03 low-altitude surveillance radaris a Ku-band phased array radar that adopts an all-solid-... |
 |
IWRFSOC8X8 Xilinx RFSoC 3U 4-Channel/ DC-4GHz | 卖方: Xi'an Interwiser Electronic Technology Co., Ltd | InterWiser IWRFSOC8x8 3U algorithm evaluation modular systemdesigned for integration into deploye... |
 |
IW-RFSOC-48DR-SYN Mixed Signal Processing Card | 卖方: Xi'an Interwiser Electronic Technology Co., Ltd | IW-RFSOC-48DR-SYN digital-analog mixed signal processing card, using Xilinx ZYNQ UltraScale + RFS... |
