HM-100 High-temperature Hygronom

Overview

Hygronom is also called gas moisture meteror dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, it also can be used in industrial online humidity monitoring.

HM-100 flue gas hygronom is equipped with an internal high-precision capacitance digital temperature & humidity sensor. The installation method adopts the in-situ immersion installation. It is a self-developed product, of which, the core component is from Switzerland. Put the sensor inside stack to get in touch with flue gas. The probe needs preheating to prevent gas from condensation, which will affect the measurement of moisture in the flue gas. After gas contacts with the measurement chip, the chip will change capacitance to measure flue gas concentration.

Features Of HM-100 High-temperature Hygronom

• The product is convenient for installation, disassembly, and cleaning with small and compact structure

• Direct and simple key operation on site

• The probe is equipped with heat tracing function to prevent condensate water from damaging humicap and thermal resistance

• Imported core components with high-performance index and reliability

Technical Parameter Of HM-100 High-temperature Hygronom

Measurement Range	H2O: 0~40.00%(volume percent)(optional)
Humidity sensor	Resistance-capacitance
Temp sensor	Pt100 platinum resistor
Accuracy	0 ～ 40.00% H2O: ± 2%
Repeatability	0 ～ 40.00% H2O: ± 1%
Stability	0 ～ 40.00% H2O: ± 1% FS / 7d
Response time	T90 ＜ 6s
Sensor life	＞2 years (under normal use)
Transmitter life	＞5 years (under normal use)
Power supply	220VAC
Instrument weight	About 10kg
Power consumption	Maximum about 35VA (heating)
Ambient temperature	Transmitter: -10°C～+55°C
	Probe: 0～180°C (except probe cable)
Ambient humidity	＜95%RH
Sample gas flow	(2 ~ 6) L / min
Analog output (2 sets)	Temperature and humidity, 4-20mA
Communication	Rs232 (standard)

Typical Application Of HM-100 High-temperature Hygronom

Other supplier products

	EM-5Hg Stack Mercury Continuous Monitoring System	Overview of Mercury Stack Monitoring Based on cold vapor atomic fluorescence spectrophotometer technology, we have developed EM-5Hg stack mercury c...
	HM-200 Hygronom	Overview Hygronom is used to measure the humidity of flue gas emitted by pollution sources. According to measured humidity, it converts wet gas con...
	EQMS VOCs Online Monitoring System	We have air quality monitors for sale! Volatile Organic Compounds (VOCS) are carbon based compounds that pose a significant health hazard due to th...
	WDet-7000 Integration Water Quality Online Analyzer	WDet-7000 multi parameter water analyzeris a high-level integration of a multi parameter water analyzer. Our multi parameter water analyzer uses a ...
	Continuous Emission Monitoring & Process Control	Zetianis one of the most professional cems analyzer manufacturersin China. The instruments and analyzers produced by Zetian now are widely used at ...

供应产品

Same products

	Tobee®TH3X2C Bombas, slurry pump supplier	卖方: 831690	3/2C-AH浆料泵是一种重型浆料泵，设计用于处理最磨蚀和致密的浆料。3/2C-AH泥浆泵为用户提供广泛的密封和衬管配置，允许泵完全定制，以满足任何特定的应用要求。3/2C-AH浆泵提供无与伦比...
	反击式破碎机，大型高抗板锤破碎设备，移动冲击式破碎制砂机	卖方: 爱迪机械制造有限公司	1、结构简单，运行稳定。2、轴承、水、料分升，避免进水或污染、生锈对轴承造成损坏。3、反击式破碎机适用于各种工作环境。4、洗后物料损失少，洗净度高，完全能满足砂子分级物料的要求。5、使用寿命长，...
	Cassava Vibrating Sieve	卖方: Nanyang Goodway Machinery & Equipment Co., Ltd.	Features of Cassava Vibrating Sieve Break the pressed cassava cakes into granules and separate t...
	Cassava Stone Cleaning Machine	卖方: Nanyang Goodway Machinery & Equipment Co., Ltd.	Features of Cassava Stone Cleaning Machine Used to remove the stones in the material such as rig...
	Garri Processing Machinery	卖方: Nanyang Goodway Machinery & Equipment Co., Ltd.	Cassava Garri(Gari) Process Description and Flowchart: Garri is a fermented and gelatinized dry ...