DSHD-600 Sea Engineering Geological Exploration Drilling Rig

   DSHD-600 sea engineering geological exploration drilling rig is a top drive power head type drilling machine with long feeding stroke. It adopted advanced technique of adjustable rotary speed frequency

changer and is equipped with 12 or 8m high derrick. It can be used to work under the condition of 80 m water depths and wind scale less than 5 grade. It is also used for water area geological exploration drilling and pile hole drilling in rivers or lakes. Main set of drill can be used for drilling pile

holes on land.

 

2.Features:

1)Top drive power head of drill adopts frequency change

to adjust rotary speed steplessly. It features long feeding stroke, compact structure, rational arrangement and wide regulating speed range, with the result that drilling machine can meet the demand of drilling in a great variety of complicated formation.

2)Safety and reliable falling-resistant apparatus of top drive power head can ensure the safety of equipment and personnel.

3)Feed micro-adjusting mechanism of drilling machine can ensure both equipment and personal safety.

4)Mechanization of break-out drill rods with hydraulic break-out apparatus reduces labor strength and increase drilling efficiency.

5)Moving top drive power head rearward integrally ensures large floor space and convenient for frequently hoisting

and lowering the drilling rod .

6)Equipped with the advanced bottom sampling device, it can meet sampling demand in complicated formation.

 

1).Hole diametermmφ110 ~ 600

2).Hole depthm600-60

3).Rod diametermmφ50 ~ 127

4).Rotary speed of top drive power headrpm Low speed range (forward and reverse)7-200

High speed range (forward and reverse)14-700

5).Feeding stroke of top drive power headmm 3500

6).Electromotor power of top drive power headkW45+45

7).Lifting capacity (single wire rope) of hoistkN Main hoist 50

Auxiliary hoist 25

Mast heightm12 loadkN400

8).Mud pump BW-250 BW-600

9).Hydraulic break out apparatus

Centre hole diametermmφ450

Breaking out diameter of rod or casingmmφ50 φ127 φ178

Break out torqueNm2200

10).Overall mounting dimension of main set: Length×Width×Heightm 3.1×1.6×6.1

11).Weight 7500KG



在线询价

至: 珠海德诚进出口有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

DSHM-DT06 Multi-Channel Fluxgate Magnetometer DSHM-DT06 multi-channel fluxgate magnetometeris widely applied to measure the vertical component or tri-component value of magnetic field. It has 1...
ATEM-IV Transient Electromagnetic System
ATEM-IV Transient Electromagnetic System Main Features   Technical Specifications Receiver Dimensions: 36×230×30cm Weight: 7Kg (without cells) Sampling Frequency: fastest ...
DSHJ411 Caliper Probe
DSHJ411 Caliper Probe Applications: check the integrity of well and provide additional information to help.   Specifications: Measuring range: 40mm to 300mm Output...
ATEM-8 Transient Electromagnetic Prospector
ATEM-8 Transient Electromagnetic Prospector Function: can be used to prospect the subsurface minerals and solve other geological problems.   Main Applications:1. Middle and deep resou...
DSHA Model Minim Uranium Analyzer
DSHA Model Minim Uranium Analyzer Application: The uranium analyzer is used in geological survey, nuclear fuel industrial department, environment protection, industrial sanitation, ...
供应产品

Same products

50KV 耐压测试仪 卖方: Pego Group (HK) Comany Limited
JL-e/JL-B/JL-W type of rail double layer vibration shock absorber and noise reduction rail fasteners 卖方: Jiangsu Jiangling Measurement & Control Technology stock Co., Ltd
VMS5200 Fault analysis system online draught fan vibration monitor 卖方: Jiangsu Jiangling Measurement & Control Technology stock Co., Ltd
JM-B-3BC Vibration transmitter, JM-B-3B2Bearing Vibration Transmitter Jiangling 卖方: Jiangsu Jiangling Measurement & Control Technology stock Co., Ltd
VMS8000C Temperature speed condition monitoring system Jiangling 卖方: Jiangsu Jiangling Measurement & Control Technology stock Co., Ltd