Circular Locus Pilling Tester
The instrument is used to test the pilling conditions ofwool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the humidity state.
Standard
GB/T.1Determination of pilling properties of textile fabrics – Part 1: Circular trajectory method
JIGBell-type gas flow standard device verification procedures
DIN.2Testing of textiles – Wear test of flat fabrics – Roll to mill
Features
1. Scientific mechanical structure, smooth rotation, no mechanical noise, no contact fatigue failure, suitable for long continuous operation.
2. The use of standard nylon brush, the rigidity of nylon wire must be uniform, so as to control the fluff effect of nylon brush.
3. Ergonomic design, the surface using a spray forming, smooth and beautiful.
Test Parameters
| Items | Parameters |
|---|---|
| Grinding head is in contact with grinding plane | ≤0.2mm |
| The parallelism of grinding head and grinding plane | ≤0.3mm |
| The relative movement trajectory of grinding head and grinding plane | 40±1mm |
| Nylon brush surface is flush, its height difference | <0.5mm |
| Grinding plane reciprocating speed | 60±1 times/min |
| Weight of grinding head | 490cN±1% |
| Weight of heavy hammer | 290cN±1% |
| Weight of hammer | 100cN±1% |
| Select the number of times | 1~9999 |
Test Reference
| Sample type | Pressure / cN | Number of fluff times | Number of pilling times |
|---|---|---|---|
| Synthetic fiber knitted fabric | 590 | 150 | 150 |
| Chemical fiber woven fabric | 590 | 50 | 50 |
| Military service (combed blended) | 490 | 30 | 50 |
| Combed wool fabric | 780 | 0 | 0 |
| Coarse wool fabric | 490 | 0 | 50 |
在线联系供应商
Other supplier products
 |
Battery Electrode Resistance Tester | Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement of ... |
 |
PV Backsheet Abrasion Tester/Coating scratch tester for solar panels/ Solar panel backsheet scratch hardness tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 1703: Flat-Plate Photovoltaic Modules a... |
 |
Martindale Abrasion And Pilling Tester | To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abrasives at low pressures an... |
 |
Spring torsion tester | Main uses: Spring torsion testing machine is suitable for all kinds of large spring torsion Angle, torsion moment test, add the corresponding acce... |
 |
Pipe drop hammer impact testing machine | Pipe drop hammer impact testing machine - Other test instrument - standard Product Information: Product Introduction: 1. Name: drop hammer impac... |
Same products
 |
Special measuring instrument for rebar profile GDC-L360-JX | 卖方: Diameter measurement system, Surface inspection system, Rebar measurement system | The special measuring instrument for rebar profileis used to precisely measure the shape and dime... |
 |
Diameter measuring equipment | 卖方: Diameter measurement system, Surface inspection system, Rebar measurement system | Diameter measuring equipment Diameter measuring equipment is used to accurately determine the di... |
 |
Hot rolled bar outer diameter measuring instrument GDC-J2400-JX | 卖方: Diameter measurement system, Surface inspection system, Rebar measurement system | Purpose:Real-time online inspection of geometric dimensions of high-speed wire rods, square steel... |
 |
UV Detector | 卖方: 淮安市鑫盛制药设备有限公司 | The ultraviolet-visible dual-wavelength detector features high sensitivity and a wide linear rang... |
 |
Fabric ici pilling and snagging box | 卖方: 标准集团 | Fabric ici pilling and snagging boxis composed of the same speed motor drive, and to maintain the... |
