Hybrid CNC Press Brakes/Hybrid Press Brake 125T4000
CNC Hybrid Press Brakes
█ General Features:
• Servo pump press brake reply on positive&reversible turning of servo motor to control oil interchange of dual-pump,Website:, reduce resistance loss of reversing valves and pressure loss.
• When idle running, servo motor will control the speed rates of pump, which will get Min power consumption of idle bending.
• When start servo motor, pump can running with almost no pressure and oil flow, very small starting power.
• When in approach and dwell time,if the system pressure meet setting pressure value, dual-pump will provide reason pressure and flow, DELEM CNC controller will give servo motor corresponding speed rates order according to needed speed and pressure, so the whole hydraulic won’t have overflow loss.
█ Advantages
• The Fastest: 18-20 mm/sec bending speed, approach can reach 220mm/s, return speed 200mm/s.• It is a fast operating press brake using servo motors and highly efficient pump.
Eco – Friendly • The new series press brakes are eco-friendly using comparably less energy than a standard press brake.• An average 65% energy saving when used in comparison to standard press brakes.
• Reduced oil level: 70% • Bending efficiency
Highest bending efficiency is achieved as no pressure is lost through proportional valves.
• Quietest in its class: 63db • 3x longer system life time
System and pump have 3 times longer lifespan due to high quality components and smart running technology.
• Oil does not heat up
Oil is more durable than ever because the oil does not heat up , as the pumping system which does not run when the machine is at stand-by mode.
• Ease of maintenance
Y1 and Y2 axes have stand-alone oil tanks. Maintenance is conducted only when required making the machine easy to maintain.
• Energy Consumption
95% less while idle between bends.
50% less during free fall.
At least 50% saving when bending. (energy consumption increases as sheet thickness increases.)
70% less consumption during return of the upper beam.
• No proportional valve.
• No hydraulic pipeline system.
• No oil leakage.
█ Standard Equipment of Servo Electric CNC Press Brakes:
• Y1,Y2,X ,R and automatic hydraulic crowning, 4+1 axis CNC sheet bending
• DELEM DA56S CNC controllers.
• Servo Electric CNC Press Brakes configurations
• Original German Rexroth valves.
• Original German Rexroth Variable ratio pump
• High Quality accurate German Heidenhain or Italy Givi linear encoder
• Original Japan Yaskawa servo motor and drive
• Cnc controlled back gauge with Taiwan Hiwin ball screw&linear guide
• Manual movable back gauge fingers along of bending length
• China top level cylinders with NOK seals
• Amada/Promecam type quick release clamping
• Schneider-Telemecanique electrical components in cabinet
• Side and rear protection safety fence
• Narrow table with European 2V quick change lower die
• Standard EUROPEAN type sectionalized top&bottom tool
• Removeable foot pedal with emergency stop buttons
• 4.1m European CNC Press Brakes
█ Optional Equipment:
• DELEM DA52S, DA66T, DA69T, DA65W, DA58T CNC Controllers
• Wila type CNC Motorised Mechanical crowning
• Additional control of CNC automatic back gauge like
X,R,Z1&Z2
R1,R2,X1,X2,Z1&Z2
• Side&rear safety fence with electrical interlock protection system
• DSP, FIESSLER,PILZ Laser guard with CE conformity
• TRUMPF, WILA clamping, top&bottom tools.
• American type compatible top tool clamping system and tools
• 1000mm working table
• Extended parking area for 2 front support arms
• Larger daylight opening
• Extra back gauge fingers& front support arms
• Wila Type hydraulic top&bottom tools clamping system
• Special colors and logo
• Special tools design according to customer’s profiles
• Other customized requirements
█ Accuracy
Ram repeat accuracy(mm)
≤±0.005
Ram positioning accuracy(mm)
≤±0.01
Back gauge repeat positioning accuracy(mm)
≤±0.01
Bending straightness(mm)
0.10/m
Bending angle accuracy(`)
≤±10
Linear encoder positioning accuracy(mm)
0.005
█ Technical Specifications:
Hybrid Press Brake 125T4000
Bending Power
125 Ton
Bending Length
4000mm
Distance between side frames
3600mm
Y1&Y2 Stroke
200mm
Max Ram Daylight opening
420mm
Throat depth
400mm
X back gauge stroke
600mm
R stroke
150mm
Approach Speed
220mm/s
Bending Speed
15-20mm/s
Return Speed
200mm/s
Main motor power
7.5kw
Gross Weight
8.5T
Dimensions(L*W*H)
4700*1600*2400mm
• Delivery time: Within 40 days
• Payment term: T/T, 30% down payment in advance and balance before shipment
• Warranty: 2 years
• Loading port: Shanghai, China
• Certificate: ISO, special requirements for CE conformity
• After Sales Service: 7*24 hours, quick response
• Installation Service and Training Service are all available if required
• Customer’s profile testing before shipment
Other supplier products
|
|
|
CNC Hybrid Press Brakes
█ General Features:
• Servo pump press brake reply on positive&reversible turning of servo motor to contro... |
|
|
|
S 540TYPICAL APPLICATIONSConventional press-brakes (Mechanical and Hydraulic),Website:, synchro Hydraulic press-brakes, servo controlled hydraulic... |
|
|
|
J23 Power Press Parameters
NO
... |
|
|
|
4m Yawei 8 Axis CNC Press Brake Machines manufactures in chinaYawei 160T4000 CNC Hydraulic Press Brake machines factory china4m cnc press brake mac... |
|
|
|
2 Axis Press Brake Machine-63T2500This 63T2500 hydraulic press brake machine can bend 4mm mild steel metal plate2500mm sheet metal bending machineS... |
供应产品
Same products
