ID12mmOD35mmThrough hole slip ring
Through hole slip ring ---BTH1235A slip ring is an electromechanical device that allows the transmission of power and electrical signals from a stationary to a rotating structure. A standard through hole slip ring can be used in any electromechanical system that requires rotation while transmitting power or signals. Its inner part rotates with a rotating shaft pass through the inner hole, so we call it " through hole slip ring".It can improve mechanical performance, simplify system operation and eliminate damage-prone wires dangling from movable joints.Parameters: Mechanical : Working speed500rpmOperating temperature-40℃~ +100℃Contact materialPrecious metalIP GradeIP 54Electrical: Circuit6 & 12Current2AVoltage240V or 380VDielectric strength≥1000V@50Hz between each circuitInsulation resistance1000MΩ@ 500VDCElectric noise≤7mΩLead wire size26AWG, UL, color Teflon, silver or tin platedLead wire length200mmLife-span120,000,000roundsDimension: TYPERingsLengthIDODBHT1235-6623.6mmΦ12.7mmΦ35mmBTH.4mmΦ12.7mmΦ35mmFeatures of Through hole slip rings :
• Low noise
• Wear-resisting (Silver to silver contacting)
• Good impact resistance
• Signal and current compatible
• Workable in hostile environment(-40℃~ +100℃)
• Flexible design for special requirements Alternatives of Through hole slip rings:
• Circuits
• Loading of each circuit
• Wire length
• Inner hole /outer hole diameter or length
• Working speed
• Gold contacting
• Housing color Typical Applications of through hole slip rings: Aerospace / Defense
• Armored vehicle turrets, IR and EO systems
• Missile seeker gimbals and inertial systems • Helicopter de-ice systems, EO / IR trackers and target systems • Fixed-wing aircraft - EO / IR trackers, fire control systems, surveillance systems and targeting systems • Missile counter measures • Space - solar array mechanisms • Shipboard / submersible - navigation systems and fire control radar • Surveillance systems Industrial • Medical equipment and devices • Robotics • Index tables • Semiconductor handling • Pan tilt cameras • Packaging and processing equipment • Cable reels • Wind energy • CT scanners Marine • Remote operated vehicles (ROV) • Seismic surveying • Oceanographic winches • Subsea communications and control • Floating production, storage and offshore loading (FPSO) • Diving
• Marine instrumentation
• Down hole / wire logging and drilling Advantages of slip ring manufacturer---ByTune:
•Affordable price
•Quality guaranteed
•Response within 24 hours
•Prompt delivery
•Reliable package & shipment
•Flexible & quick customization Delivery time and shipment:
•2 weeks ARO
•By UPS ,DHL or FedEx (depends on your location) 3 days door to door service Installation Guide: Proper use and mounting instruction:
◆Slip ring can not support the weight of equipment which connected with it, rotating equipment should be fastened so that its weight will not fall on the rotor.
◆No force to slip ring in the direction of parallel to axis.
◆No damage to the surface of lead wire while equipment rotating, all lead wire can not
bear weight while being aligned.
◆Because of possible geometric mismatching between the customer's system and the
slip ring, "hard mounting "of both ends of the slip ring (i.e., securing the rotor and stator such that is NO floating during operation) is not recommended and it may cause premature failure.
◆Without specifying, all parameter should be within the range of specification indicated, such as :
Working Speed
Voltage
Current
Dielectric Strength Protection Grade
◆It is very precise component, please do not disassemble it .
◆ If start working after long time storage, please rotate it 5-10 minutes non-load.
◆ While working, each circuit should be with protection of over-loading to avoid being burned.Recommandation:BTH0932BTH1256BTC035Measurement and Test: 3D Test Concentricity Test Electric noise Test Projecto Interference test Reliable contact Test
Other supplier products
|
|
|
BTC008, Capsule Slip Ring |
|
|
|
BTC045, Capsule Slip Ring |
|
|
|
ByTune Electronics offers reliable, durable, low electric noise OD 22mm, 32 Circuits With 4 mmThrough Hole Slip Rings , ByTune Electronics Co.,Ltd ... |
|
|
|
A slip ring is an electromechanical device that allows the transmission of power and electrical signals from a stationary to a rotating structure. ... |
|
|
|
ID 38mm, OD 99mm, 2~24 circuits , 1200rpm, IP54~IP68, Electric noise: 0.007mOhm, 2A/5A/10A/15A/30A optional. |
供应产品
Same products
