PPS WR Wear-restardant Reinforced Polyphenylene Sulfide PPS manufacturer free sample
Xiamen Keyuan Plastic Co.,Ltd is one of the professional reinforced wear pps manufacturers, you can order high quality reinforced wear pps at good price from our factory.PPS-product SpecificationsSpecifications reinforced wear pps1. high quality, reasonable price 2. good abrasion, high toughness 4. ISO.ROSH We also can modified plastic materials according to customer’s need.Product namePPS Wear resistanceColorAs requiredAdvantageCompetitive price,high quality,on-time delivery,free sampleEnvironment friendlyHigh Heat Resistance,High impact resistanceWithout any impurityApplicationHigh temperature mechanical components, industrial partsPacking25kg/bag (also customizable)PPS-Product Properties项目 典型性能典型性能典型性能典型性能测试标准ItemTypical CharacteristicTypical CharacteristicTypical CharacteristicTypical CharacteristicTesting StandardKY-S82F1KY-S82F2KY-IS82F3KY-IS82F4密 度 Density 1.55g/cm31.7g/cm31.68 g/cm31.94g/cm3GB/T 1033-1986成型收缩率 Molding Shrinkage0.0025 mm/mm0.0025mm/mm0.0025mm/mm0.0025mm/mmGB/T 15585-1995压缩强度140 Mpa130 MPa135 Mpa160 MpaGB/T 1041-1992洛氏硬度Rockwell Hardness 100 HR111 HR111 HR96 HRGB/T 9342-1988 拉伸强度 Tensile Strength 142 MPa180MPa176 MPa164 MPaGB/T 1040-1992断裂伸长率Elongation at break1.70%1.60%1.90%12.50%GB/T 1040-1992弯曲模量Flexural Modulus 1.1×104MPa1.36×104MPa1.63×104MPa1.63×104MPaGB/T 1042-1992弯曲强度Flexural Strength 180MPa272MPa284.7 MPa244MPaGB/T 1042-1992悬臂梁缺口冲击强度Izod Notched Impact Strength11.5KJ/m2 14KJ/m2 13 KJ/m2 12KJ/m2 GB/T 1843-1996体积电阻率 Volume Resistivity 1.0×1015ΩNaN5×1014ΩNaN3.4×1014ΩNaN8×1013ΩNaNGB/T 1410-1989表面电阻率 Surface Resistivity 2.3×1015Ω5×1014Ω2.2×1015Ω3×1014ΩGB/T 1410-1989介电常数 Permittivity4445GB/T 1409-1988电气强度18.56 KV/mm17 KV/mm19.1 KV/mm14 KV/mmGB/T 1408.1-1999熔点Melting Point282℃282℃282℃288℃GB/T 4608-1984热变形温度 Heat Deflection Temperature267℃265℃267℃270℃GB/T 燃烧性（垂直法）FV-0 GradeFV-0 GradeFV-0 GradeFV-0 GradeGB/T 2408-1996使用温度 Use temperature加工温度 Processing temperature : 230 - 250 °C模具温度 Mould temperature : 100 - 120 °C背压 Back pressure : ca.10 - 15 bar注塑速度 Injection speed : 中/高 medium/high干燥 Pre-drying : 需要 necessaryPPS-Product certificationPPS-ProductionflowPPS- Our Cooperative CustomersPPS-Tranportways
Other supplier products
供应产品
Same products
