Latex Remover

Application: Use for Tank cleaning of Cargo tank, Tank Container and Storage Tank. Also use in workshop as a stripper to clean the lates from floor. Dose: 1. Butter worth the tank after discharge without any delay for 2 hours with warm fresh water and inject from the beginning on the RXSOL LATEX REMOVER. Make the solution of Rxsol Latex Remover 4-10% with water for tank cleaning procedures. Allow product to soak for 20 minutes and flash down with fresh water. Same for circulation method where time for circulation could be between 1-3 hours. An additional circulation could be necessary when deposits of Latex are quite heavy . Spray RXSOL LATEX REMOVER at ambient temperature and allow approximately 20 minutes activation time. The latex can then be removed with cold water by means of high pressure.


至: West India Chemical International
Your E-mail:

Send to other suppliers

Other supplier products

Dgreaser sb
Antifreeze Liquid
Antifreeze Liquid Item Code: RXSOL-16-4020-020Antifreeze Liquid compound for cooling water systems , it is a very effective blend of glycol classified chemicals alon...
moya oil
moya oil RXSOL MOYA OIL is effective and economical emulsifier. Safe to use on most metal surfaces, painted and coated surfaces and also used as a multipurp...
Metallic Brighther Eco Rust
Metallic Brighther Eco Rust It is a superior heavy duty and highly concentrated liquid blend of surfactants organic compounds containing rust penetrating agents , solubility a...
Latex Remover

Same products

卖方: Shanghai Dongmei Chemical Co.,Ltd
卖方: Shanghai Dongmei Chemical Co.,Ltd
卖方: Shanghai Dongmei Chemical Co.,Ltd
卖方: Shanghai Dongmei Chemical Co.,Ltd