Evaporation Technology
Effectively reduce the tower kettle temperature and improve product quality and yield.
Evaporation TechnologyIntroduction
Falling Film Evaporationis a process in which the liquid feed is introduced into the upper header box of the heating chamber of a falling film evaporator, and then evenly distributed to each heat transfer tube by a liquid distribution and film-forming device. Under the effects of gravity, vacuum induction, and gas flow, the liquid forms an even film that flows down from top to bottom. In the distillation unit, the vapor phase directly enters the tower for distillation, while the liquid phase is discharged from the separation chamber or circulated back into the evaporator by the pump.
Technical Principle of Evaporation Technology
Design conditions: we use the most safe and stable falling film reboiler model in present day, and the falling film introduces the multi-level distribution form including the distribution plate and the film distribution header.
Process Calculation: based on the calculation of advanced simulation software, key parameters such as gasification rate, circulation volume, flooding factor, gas-phase rate, heat exchange area, etc. are determined.
Distributor/Calculation of Film Distribution Header: various hydraulic models are conducted to design distribution system under specific operation conditions, further more hydraulic calculation is operated with independent software.
Characteristics of Evaporation Technology
1
Design conditions:
We use the most safe and stable falling film reboiler model in present day, and the falling film introduces the multi-level distribution form including the distribution plate and the film distribution header.
2
Process Calculation:
Based on the calculation of advanced simulation software, key parameters such as gasification rate, circulation volume, flooding factor, gas-phase rate, heat exchange area, etc. are determined.
3
Distributor/Calculation of Film Distribution Header:
Various hydraulic models are conducted to design distribution system under specific operation conditions, further more hydraulic calculation is operated with independent software.
4
With rich experience and advanced technology, DODGEN falling film evaporator has been applied in various fields of heat-sensitive substances separation, the temperature of tower kettle is reduced, thus improving product quality and yield, and obtaining positive feedback from customers.
Applications of Evaporation Technology
In the evaporation and rectification section of heat sensitive substances, MVR system evaporator is particularly suitable for typical applications，such as：
MDI distillation
Vitamin E rectification
Ethylene glycol distillation
Hydrogen peroxide rectification
Nylon 11 distillation
Solvent recovery
MVR evaporation
And many other fields such as petrochemical, medicine and food.
For more informationabout chemical process pdf, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Micro Reactor | Technical Principle Of Micro ReactorComposition of D-AMERT high flux microreactor：Transfer metering unit —Temperature control unit—micr... |
 |
Continuous Flow Reactor | A continuous flow reactoris a reactor in which a chemical reaction takes place in a continuous stream of fluid or gas. Unlike batch reactors, which... |
 |
Gas-liquid Separator | Complete liquid nitrogen separatorproduct chain has been considered to customize separation scheme for customers. Technical principle Of gas liq... |
 |
Distillation Technology | Technical Principle Of Technology Distillation distillation technology Gas-liquid two-phase contact through countercurrent for interphase heat an... |
 |
Extraction Tower | Extraction process definition Advanced liquid-liquid extraction tech, solving separation problems and providing economical solutions Technical ... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
