addition base Silicone Rubber for Prototyping 3d lost wax castings Mold Liquid
addition base Silicone Rubber for Prototyping 3d lost wax castings Mold Liquid
Description
Two-component silicone,platinum-curing/ addition-cure type, flowable, vulcanizes at room temperatureor heated temperature.
Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties.
Application
- Suitable for molding variety of products in large quantity, such us art crafts, furniture, architectural elements, garden ornaments, shoe, tire, soap, candle, vacuum bagging, wind turbine blades, ship/boat hulls, aircraft hulls, FRP pipes/profiles, beacon lighthouse covers, military industry, aviation and other fields etc.
- Suitable for materials such as resin, PU, PVC, polyester, gypsum/plaster, wax etc.
Features& Advantages
²Food grade, FDA
²Low shrinkage
²Low viscosity
²Anti-deformation
²High temperature resistance
²Not oily
²No bubbles
²Excellent flow levelingwhich will copy finest details and patterns from exquisite products.
²Durable with excellent tear and tensile strength, guarantee molding times
²Easily demolding
²Resist aging, acid,alkali,corrosionand weather aging
Typical propertiesINI-E640
|
PropertiesIndex |
Test Report |
|
|
Before Curing |
Appearance |
Translucentfluid |
|
Viscosity（cps） |
7000±3000 (Adjustable) |
|
|
Operating |
Mixing Ratio （By weight） |
1：1 |
|
Operating Time（25℃/min） |
30～50 (Adjustable) |
|
|
Curing time（hr,basically cured） |
3~5 (Adjustable) |
|
|
Curing time（hr, perfectly cured） |
12 |
|
|
After Curing |
Hardness (shore A) |
40±2 |
|
Tear strength (kN/m) |
16±3 |
|
|
Tensile strength (Mpa) |
8±1 |
|
|
Shrinkage (%) |
≤0.1 |
|
|
Elongation (%) |
320~460 |
|
|
Density (g/cm) |
1.02 |
|
Operation instructions
1.Mix part A and pars B evenly with 1:1 mixing ratio.
Notes: 1) Weigh the two parts exactly by electronic weight. For example, the operation time will be shorten after adding too much catalyst.
2)Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and waste silicon rubber.
2.Vacuum pumping
Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture successfully, so as to ensure that therewill be no bubbles in the finished mold.
2) This step is less than 10 minutes. Otherwise, itWill cause cross-linking reaction, and no morefurther steps will be available.
- Pouring casting
Notes: We suggest to set the mold for another 12 hours after demould before put it into large production.
Package
5KG, 20KG, 25KG and 200KG per drum.
(There are metal drum and plastic drum for your choice for 5KG and 20KG)
Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25℃.
WhyChooseus
1.Powerfulfactorywithaproductioncapacityof8000perday, we are the more than 10 years factory in China, with excellent and stable quality.
2.High-endresearchanddevelopment(freesample)
BeingaleadingliquidsiliconemanufacturerinChina,wehaveaprofessionalR&DteamandQCteam(12experts)andourproductisRoHS,MSDS,ISO,REACH,ULapproved,sothereisnoneedtoworryaboutthequality.
3,Efficientservice
Wecanprovidefreetrainingofsiliconetechniqueandfreesiliconesamples.wehaveaprofessionalsalesteamwhowillsolveyourproblemspatiently.Besides,withefficientlogisticsdistributionsystem,youcouldgetyougoodsearlier.Last,goodaftersalesservice,webuildlongtermcooperationrelationship,oncethereisqualityproblem,wecouldsolverightaway.Moreimportantly,returnandexchangeareacceptedwhilequalityproblemsoccurred.
We can provide the free sample, more details about silicone rubber, pls contact Ms Lisa at:
Mobile/ Whatsapp/: +86 188 1670 2967
2967or A108059
E-mail:lisasilicone(at)
Twitter/Facebook:lisasilicone
在线联系供应商
Other supplier products
 |
rtv2 liquid tin cure silicone rubber soap candle art craft mold | rtv2 liquid tin cure silicone rubber soap candle art craft mold Description Two-component silicone, tin-curing, flowable, vulcanizes at room temp... |
 |
双组分锡固化硅橡胶模具免费样品 | 1. ОписаниеДвухкомпонентный силикон, отверждаемый оловом, текучий, вулканизируется при комнатной температуре.Может использоваться в течение длитель... |
 |
RTV potting compound silicone rubber good dielectric properties versatile cure | RTV potting compound silicone rubber good dielectric properties versatile cure Description Two-component silicone,platinum-curing/ addition-cure... |
 |
UL 94 V0 grade silicone encapsulating potting compound sensors led pcb | UL 94 V0 grade silicone encapsulating potting compound sensors led pcb Description Two-component silicone,platinum-curing/ addition-cure type, f... |
 |
clear platinum cure silicone rubber jewelry molding high quality free sample | clear platinum cure silicone rubber jewelry molding high quality free sample Description High transparency, two-component silicone,platinum-curin... |
Same products
 |
Heat Sealing Sterilization Pouch | 卖方: Hopeway AMD | Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ... |
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | 卖方: Trucont LLC | Trucont LLC 持续供应催化转化器废料，可立即装运发货。我们为全球各地的回收公司、金属加工商、汽车回收商、废料贸易商和买家提供优质的催化转化器废料。我们的催化转化器废料经过精心收集、分类... |
 |
Epimedium Extract | 卖方: Fruit Powder,Vegetable Powder | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
