High-Purity Krypton
Product Details
Product Names
High-Purity Krypton
Pure Krypton
Krypton
Purity
High-Purity Krypton: ≥99.999%
Pure Krypton: ≥99.995%
Impurity Content (ppm)
| Impurity | High-Purity Krypton | Pure Krypton |
|---|---|---|
| Nitrogen (N₂) | ≤2 | ≤8 |
| Oxygen (O₂) + Argon (Ar) | ≤1.5 | ≤5 |
| Hydrogen (H₂) | ≤0.5 | ≤1 |
| Carbon Monoxide (CO) | ≤0.3 | ≤0.4 |
| Carbon Dioxide (CO₂) | ≤0.4 | ≤0.8 |
| Hydrocarbons (CH₄) | ≤0.3 | ≤0.8 |
| Water (H₂O) | ≤2 | ≤3 |
| Xenon (Xe) | ≤2 | ≤20 |
| Fluoride Content (CxFy) | ≤1 | ≤10 |
Packaging
Filled in 40L steel cylinders, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Recommended for industrial use, used in incandescent light bulbs, fluorescent lamps, counters, laser light sources, ultraviolet light sources, standard gases, special mixed gases, etc.
Physical and Chemical Properties
CAS Number: 7439-90-9.
Physical and Chemical Characteristics: Colorless and odorless inert gas. Insoluble in water and ethanol. Melting point (℃): -156.6; Boiling point (℃): -151.7; Relative density (water=1): No data; Relative density (air=1): 2.92; Saturation vapor pressure (kPa): No data; Flash point (℃): Not applicable; Combustion heat (kJ/mol): Not applicable; Critical temperature (℃): No data; Critical pressure (MPa): No data; Upper and Lower Explosion Limits (v%): Not applicable; Ignition temperature (℃): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Non-flammable. Remove containers from the fire area if possible. Spray water to keep the containers cool until the fire is out. Evacuate people to the upwind side and isolate the contaminated area. Emergency personnel should wear self-contained positive pressure breathing apparatus and general work clothes. Cut off the leak source if possible. Ensure adequate ventilation to disperse the gas. Handle the leaking container properly, repair and inspect before reuse.
Health Hazards: Inert gas, high concentrations can reduce oxygen partial pressure and pose a risk of asphyxiation. Symptoms include increased breathing rate, lack of concentration, ataxia, followed by fatigue, restlessness, nausea, vomiting, coma, convulsions, and potentially death.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
在线联系供应商
Other supplier products
 |
Wood grain powder coating | Product introduction Conventional series wood grain – suitable for standard decorative purposes; E series high-definition wood grain &ndash... |
|
|
Powder coating primer containing zinc | Product Description MT-PZ is a powder coating primer containing zinc which is designed to give enhanced corrosion protection of mild steel. This d... |
 |
High-Purity Acetylene | Product Details Product Names High-Purity Acetylene Industrial Acetylene Acetylene Purity High-Purity Acetylene: ≥99.9% Industrial Acetyl... |
 |
Pure epoxy powder coating | Product model CH Product characteristics Excellent performance, strong versatility, excellent corrosion resistance and electrical insulation. P... |
 |
Sand-Textured 3D Wood Grain Powder | Introduction Sand-textured 3D wood grain powder is a specialized coating that replicates natural wood texture with a sandy, matte finish and a thr... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
