High-Purity Methane
Product Details
Product Names
High-Purity Methane
Pure Methane
Methane (CH₄)
Purity
High-Purity Methane: ≥99.999%
Pure Methane: ≥99.99%
Impurity Content (ppm)
| Impurity | High-Purity Methane | Pure Methane |
|---|---|---|
| Ethane (C₂H₆) | ≤5.0 | ≤25 |
| Oxygen (O₂) | ≤2.0 | ≤10 |
| Nitrogen (N₂) | ≤2.0 | ≤35 |
| Hydrogen (H₂) | ≤1.0 | ≤10 |
| Water (H₂O) | ≤1.0 | ≤15 |
Packaging
Filled in 40L steel cylinders, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Primarily used as fuel, such as natural gas and coal gas, widely used in civilian and industrial applications. As a chemical raw material, it can be used to produce acetylene, hydrogen, synthetic ammonia, carbon black, chloroform, carbon disulfide, methyl chloride, methylene chloride, chloroform, carbon tetrachloride, and hydrogen cyanide, etc.
Safety Information
CAS Number: 74-82-8.
Physical and Chemical Properties: Colorless and odorless gas, soluble in alcohol and ether. Melting point (℃): -182.5; Boiling point (℃): -161.5; Relative density (water=1): 0.42 (-164℃); Relative vapor density (air=1): 0.55; Saturation vapor pressure (kPa): 53.32 (-168.8℃); Critical temperature (℃): -82.6; Combustion heat (kJ/mol): 889.5; Critical pressure (MPa): 4.59; Flash point (℃): -188; Ignition temperature (℃): 538; Upper explosion limit (v%): 15; Lower explosion limit (v%): 5.3.
Combustion and Explosion Hazards: Flammable, forms explosive mixtures with air, poses a risk of combustion and explosion when exposed to heat sources and open flames. Reacts violently with bromine pentoxide, chlorine, hypochlorous acid, nitrogen trifluoride, liquid oxygen, difluorine oxide, and other strong oxidants.
Firefighting Methods: Cut off the gas supply. If the gas supply cannot be cut off, do not extinguish the fire at the leak site. Spray water to cool the container, and if possible, remove the container from the fire area to an open space. Fire extinguishing agents: water spray, foam, carbon dioxide, dry powder.
Health Hazards: Methane is essentially non-toxic to humans, but at high concentrations, it significantly reduces the oxygen content in the air, causing asphyxiation. When the concentration of methane in the air reaches 25% to 30%, it can cause headaches, dizziness, fatigue, lack of concentration, accelerated breathing and heartbeat, and ataxia. Failure to leave the area promptly can lead to asphyxiation and death. Skin contact with liquefied methane can cause frostbite.
First Aid Measures: Skin contact: Seek medical treatment if frostbite occurs. Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. Seek medical attention.
在线联系供应商
Other supplier products
 |
Purple powder coating | Purple Powder Coating – Classification, Applications & Advantages ClassificationTypical ApplicationsProduct Advantages Glossy... |
 |
Polyamide rheology additives CRAYVALLAC MT | Product Benefits Polyamide rheology additives/CRAYVALLAC MT is a micronised amide modified hydrogenated castor oil rheology modifier for solvent-b... |
 |
Thin Coating Powder Series | Introduction Key Features & Specifications FeatureSpecification / Benefit Ultra-Thin Film Formation Achieves30–50μm film... |
 |
Polyester based powder coating MT-OA110G | Product Description MT-OA110G is a polyester based powder coating, formulated without TGIC. Powder Properties Chemical type Polyester TGI... |
|
|
Metallic flat matte MT-629/94810 | Introduction No. MT-629/94810 Color White Surface Metallic flat matte System Super weather-resistant polyester S... |
Same products
 |
Trimellitic anhydride 97% | 卖方: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | 卖方: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | 卖方: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | 卖方: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | 卖方: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
