Nitrile rubber compound
Excellent oil resistance, high wear resistance, good heat resistance, strong adhesion. Its disadvantages are poor low temperature resistance, poor ozone resistance, poor insulation performance, and slightly low elasticity. Nitrile rubber is mainly used to make oil-resistant rubber products.
| Category | Details |
|---|---|
| Composition | –Base Polymer: Nitrile Butadiene Rubber (NBR, acrylonitrile content 18–50%) |
| –Reinforcing Fillers: Carbon black (30–50 phr), clay (10–20 phr) | |
| –Plasticizers: Phthalate esters (5–15 phr) | |
| –Curing Agents: Sulfur/accelerators (1–4 phr) | |
| Physical Properties | –Hardness (Shore A): 40–90 (ASTM D2240) |
| –Tensile Strength: 10–25 MPa (ASTM D412) | |
| –Elongation at Break: 300–600% (ASTM D412) | |
| –Abrasion Resistance: <200 mm³ (ASTM D5963. Taber Wear) | |
| Thermal Resistance | –Service Temperature: -30°C to +120°C (intermittent 150°C) |
| –Thermal Stability: <15% weight loss at 120°C (24h, ASTM D573) | |
| Chemical Resistance | –Resistant To: Mineral oils, greases, hydraulic fluids, and dilute acids |
| –Limitations: Polar solvents (e.g., acetone), ozone, and weathering | |
| Key Applications | –Automotive: Fuel hoses, O-rings, and seals |
| –Industrial: Gaskets, conveyor belts, and oil-resistant rollers | |
| –Consumer: Gloves, footwear soles, and adhesive tape backing | |
| Processing | –Mixing: Two-roll mill (15–30 min, 40–60°C) or internal mixer |
| –Molding: Compression/injection molding (150–180°C, 5–20 MPa) | |
| –Curing: Post-cure (150°C, 2–4h) for compression set optimization | |
| Safety & Compliance | –MSDS: Non-flammable (flash point >200°C); avoid inhalation/skin contact |
| –Regulatory: REACH, RoHS, and FDA 21 CFR 177.2600 (food-grade variants) | |
| Storage | –Conditions: Cool (<25°C), dry, away from UV/ozone; shelf life 6–12 months |
| –Packaging: Polyethylene-lined bags (prevent moisture absorption) | |
| Quality Control | –Testing: Mooney viscosity (ML 1+4. ASTM D1646), compression set (ASTM D395) |
| –Certifications: ISO 9001 (manufacturing), ASTM D2000 (standard classification) |
在线联系供应商
Other supplier products
 |
Exterior durable polyester powder coatings with antimicrobial technology | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product description MT-610 AM is a range of polyester TGIC Free powder coatings des... |
 |
Powder coating for pipeline anticorrosion | Introduction The service life of the pipeline depends largely on the anti-corrosion method of the steel pipe. The use of good coating materials an... |
 |
Aluminum profile powder | Brief description Made with saturated polyester resin and curing agent such as TGIC or HAA as the main base material. Features Excellent mechani... |
 |
Medical Powder Coating | We are a Chinese factory with over 20 years of export experience, supplying premium coatings to hospitals, medical equipment manufacturers, and OEM... |
 |
Standard Building Materials Powder | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Polyester resin and TGIC curing agent as the main raw materials. PRODUCT FEATURES Coati... |
Same products
 |
Epimedium Extract | 卖方: Fruit Powder,Vegetable Powder | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
 |
Pomegranate Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... |
 |
Orange Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel... |
