Hydroxylated acrylic dispersion STD 2033
Product Description
Hydroxylated acrylic dispersion STD 2033 is a hydroxyfunctional polyacrylic dispersion designed for vehicle,machinery and anticorrosion coating. In combination with polyisocyanates or other crosslinkers, it can be used for tow-component coating. It also can be used for one component baking coating with amino resins or blocked polyisocyanates. Approx. 46% in water/solvent naphtha 100/1-butoxy-2-propanol, approx. 44:4:4. Neutralizing agent,N,N-dimethyl ethanolamine(<2wt%), bound as a salt.
Properties
1. High gloss, gloss (60°) > 92%.
2. Excellent resistance to chemicals and salt spray.
3. Good weather resistance.
4. High hardness, hardness (combination with polyisocyanates) 2H.
Characteristic data
| Property | Value | Unit |
| Appearance | Milky white liquid | % |
| Weight solids | 46±1 | |
| pH | 7.0-9.0 | |
| Viscosity | 150-3800 | mPa·s |
| OH content | 4.2 | % |
| Density | 1.06 | g/cm3 |
*These properties are typical but do not constitute specifications.
Storage
The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 6 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. It is suggested to filter before application and use up once the package is open. The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10% solution of N,N-dimethyl ethanolamine.
在线联系供应商
Other supplier products
 |
Polyester resin based thermo-setting powder coatings MT-300 AM | Product Description MT-300 AM is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the ... |
 |
Fluorocarbon powder coating | Introduction Standard fluorocarbon powder coating is a 100% solid powder coating with fluorine-containing resin as the main film-forming material.... |
 |
Polyurethane waterproof coating A STD-939 | Introduction The polyurethane prepolymer has a high resin content with excellent ratio of NCO, which can form a highly dense and elastic waterproo... |
 |
Epoxy Anti-Corrosion Powder Coating for Firefighting Pipes | Product Introduction:This product is formulated using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and advanced curing agents, d... |
 |
Super durable polyester powder coatings | Introduction ProductsPorducts DescriptionProduct StandardsWarranty Super durable polyester powder coatings High durable resin and inorgani... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | 卖方: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | 卖方: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | 卖方: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | 卖方: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | 卖方: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
