Gray wrinkle color powder coating

COLORS AVAILABLE

RAL colors coating powder

Pantone colors

Color-matching regarding customer requirement is available

PHYSICAL PROPERTIES

Specific gravity :1.2 ~1.8g/cm3 up to colors

Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

Level of liquidity:24 ~27 mm

CURING CONDITIONS

180 °C ~200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters /kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is anon-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property
Testing items	Standards and methods	Inspecting index
Impact strength	GB/T1732-1993. AS3715 2.8	>50kg/cm
Bending resistance	GB/T1185-88. AS1580 402.1. ISO9227	Pass 2-5 millimeters
Adhesion CHECKED TEST	GB/T9286-88.2mm Cross cut, ISO2409	Pass100/100. passes 0levels
Cupdrawing:Erichsen, ISO1520	Erichsen, ISO1520	Pass 3-7 millimeters
Chemical resistance and weather resistance
Salt spray test	GB/T1771-91.500 hours	The cross section of corrosion less than 2MM
Hot and damp resistance test	GB/T,1000 hours	Without air bubbles, loses the light slightly
Acid resistance	10% CH3COOH, 240 hours	Without air bubbles, the surface without damage
Alkali resistance	10% NaOH, 240 hours	Without air bubbles, the surface without damage
Heat resistance	200degree,1 hour	The color change is lower than E=1.5
Solvent resistance	MEK24 hours soaked in solvent-free	Without air bubbles, the surface without damage
Uvioresistant	QUV-313.500 hours	Gloss higher than 80% lower than the Munsell color change level
Water tolerance of	2 hours	No bubble, not falling, losing light

Other supplier products

	Metallic sand texture matte MT-019/91274	Introduction No. MT-019/91274 Color Metallic color Surface Metallic sand texture matte System Weather-resistant polye...
	Silicon Dioxide STD	Technical Data Properties Units Target Values(SpecLimits) Test results Silicon dioxide content (dry product) % ≥98 99.7 L...
	Normal temperature coating	Product introduction Used for solar back panels, building exterior walls, steel structures, aluminum coils, etc. Technical data Items Qua...
	Epoxy Anti-Corrosion Powder Coating for Firefighting Pipes	Product Introduction:This product is formulated using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and advanced curing agents, d...
	Industrial Equipment Acrylic Resin Powder Coating	1. Product Category Specifications Our diverse range of acrylic formulations is engineered to meet specific chemical and functional requirements: ...

供应产品

Same products

	Trimellitic anhydride 97%	卖方: Yufeng International Group Co., Ltd	Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a...
	Isobutyric Anhydride CAS 97-72-3	卖方: Yufeng International Group Co., Ltd	Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo...
	Isobutyric Acid CAS 79-31-2	卖方: Yufeng International Group Co., Ltd	Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met...
	2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5	卖方: Yufeng International Group Co., Ltd	AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and...
	Dimethyl sulfoxide (DMSO) CAS: 67-68-5	卖方: Yufeng International Group Co., Ltd	Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture...