EE pure epoxy powder coating
Surface Finish Options Overview
Product description
Made with epoxy resin as the main raw material, it has excellent chemical resistance and mechanical properties.
Application areas:
Suitable for coating metal products with high requirements for corrosion resistance, electrical insulation and flexibility. It is generally not recommended to be used directly for surface coating of various outdoor products.
Physical properties:
1. Specific gravity: 1.2-1.8 (depending on color and gloss)
2. Storage: Below 25℃, in a dry environment, it can be stored for 6 months if the packaging is intact.
3. Packaging: 15 kg/box, carton packaging, lined with two layers of polyethylene inner bags.
Coating performance:
| Spraying area | 8-12 m2/Kg, film thickness 70μm (100% powder usage rate) | |
| Adhesion | GB/T 9286 | Grade 0 |
| Impact | GB/T 1732 | 50cm |
| Cupping test | GB/T 9753 | ≥ 6 mm |
| Bending test | GB/T 6742 | ≤ 3 mm |
| Pencil hardness | GB/ 6739 | ≥ H |
| Salt spray test | GB/T 1771 | 1000 h passed |
| Moisture and heat resistance | GB/T 1740 | 1000 h passed |
Application instructions:
Surface treatment: Treat according to the substrate and required performance
Spraying: electrostatic gun or friction gun
Film thickness: 60-70 um
Curing conditions: Workpiece temperature/time: 140-200℃ x 15 minutes (depending on the specific product)
Health and safety:
This powder coating is a non-toxic product, but dust should be avoided during use. Operators are advised to wear appropriate dust masks and glasses. If possible, try to avoid long-term contact between skin and powder coating.
Safety and Protection
All dust is irritating to the respiratory system, so avoid inhaling dust and steam generated during curing. Take measures to avoid skin contact. If contact is necessary, wash the skin with water and soap. If contact with the eyes, wash immediately with clean water and seek medical attention in time. Avoid the deposition of dust and powder particles on the surface and dead corners. Tiny organic particles will ignite and explode under static electricity. All equipment must be grounded to prevent static electricity.
在线联系供应商
Other supplier products
 |
Titanium dioxide STD-9300 | STD-9300 is Alumina, Zirconia and organic treated rutile pigment which produced by sulphate process. It is designed to give optimum properties over... |
 |
Special Powder Coating for Coil and Pre Coating Plate | Product Characteristic: Special powder coatings for coil and pre coating plate is not only with simple construction,excellent appearance and one-s... |
 |
Metallic sand texture matte MT-049/7C130 | Introduction No. MT-049/7C130 Color Gray Surface Metallic sand texture matte System Polyester Scope of applicati... |
 |
Epoxy Zinc-Rich Powder Coating | Surface Finish Options Overview Product SegmentationApplication Fields Epoxy Zinc-Rich Powder Coating Wind power, transportation i... |
 |
Powder coating for automobile wheels MT-Al00 | Product Overview: Special powder coating for wheels (rims), a series of epoxy polyester powder coating products specially designed for the charact... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
