Powder coatings for coil springs and torsion bars
Product Description
MT-A1242 powder coating has an excellent line of coatings for coil springs, and torsion bars essential to the safe performance and comfortable ride of today’s car and truck chassis systems. MT-A1242’s single layer systems offer unyielding performance in corrosion and chip resistance balanced with excellent application efficiencies. Our patented Super Single Coat for coil springs offers superior corrosion protection and critical chip resistance to bring you the most economical and responsible choices in coatings for high performance, high tensile springs.
Powder properties
| Chemical Type | Epoxy |
| Area of usage | Automotive suspension springs |
| Appearance | Smooth |
| Gloss level (60°) | >40 GU |
| Colour | Black |
| Recommended Film Thickness | 330 – 380 µm (13 – 15 mils) |
| Density (g/cm3) | 1.41 ± 0.05 (calculated) 0.9 – 1.2 (measured, cured film) |
| Gel time (at 200 °C) | 36 – 54sec |
| Application | Electrostatic |
| Storage | Under dry, cool (<21°C) conditions |
| Shelf life | 10 months from the production date |
| Curing schedule
(at object temperature) |
25 minutes at 150°C (time at object temperature)
25 minutes at 300°F (time at object temperature) |
Mechanical Tests
| Adhesion | DIN EN ISO 2409 | Gt 0 |
| Pencil Hardness | TSH1539G | B |
| Erichsen cupping | DIN EN ISO 1520 | ≥ 8 mm |
| Impact resistance | DIN EN ISO 6272 | ≥ 140 ip (direct)
≥ 140 ip (reverse) |
Test Conditions
Testing has been determined under laboratory conditions using the following application properties and is for guidance only.
| Substrate | Steel panels CRS ACT B958 P90 |
| Pretreatment | Zinc Phosphate |
| Film thickness | 330 – 380 µ (13 – 15 mils) |
| Cure schedule | 20 minutes at 160°C |
Actual film performance will depend on the individiual circumstances in which the product is used.
Pre-treatment
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1242. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.
Application
MT-A1242 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
在线联系供应商
Other supplier products
 |
High Solid Content Specialty Powder Coating | Chlorinated Polyether | High-Durability | Chemical-Resistant We provide high-performance Chlorinated Polyether (CPE) powder coatings manufactured ... |
 |
Ral1028 Yellow Color Tiny Texture/Sandy Effect Powder Coating | Main Properties Suitable for interior use; Available in full colors and finishes; Good chemical resistance and mechanical performance; Storage ... |
 |
Kitchen supplies powder coating | Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”... |
 |
Electronic and Electrical Powder Coating | We are a trusted Chinese powder coating manufacturer with over 20 years of export experience, delivering premium coatings to electrical appliance, ... |
 |
PS 26-1017 PK Pigment Brown | Description PS 26-1017 PK is a yellowish Zinc Ferrite. Its colour is comparable to iron oxide yellow. It has excellent chemical resistance, outdo... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
