High durability powder coatings MT-810 AM
Product Description
MT-810 AM is a series of high durability powder coatings, formulated without TGIC, designed for exterior exposure. Tested against the most severe specifications MT-810 gives significantly improved gloss retention and resistance to colour change. MT-810 AM powders are available in a wide range of colours and gloss levels and can be custom matched to the user’s requirements. MT-810 AM is a high-quality powder coating designed to meet decorative and functional demands of your specifications. Additionally MT-810 AM uses antimicrobial technology to reduce the number of microbes such as bacteria and mold. Test results have proven reduction of bacteria and mold up to 99.9%.
Powder properties
| Chemical Type | Polyester TGIC-free |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.2-1.7 g/cm³ depending on colour |
| Storage | Dry cool conditions below 25°C |
| Shelf life | 12 months |
| Stoving schedule
(object temperature) |
15 minutes at 190°C
10 minutes at 200°C 8 minutes at 210°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Pre-treatment | Chromate conversion |
| Substrate | Aluminium |
| Stoving Schedule
(object temperature) |
10 minutes at 200°C |
| Film Thickness | 60 microns |
Mechanical Tests
| Adhesion
(2mm Crosshatch) |
ISO2409 | Gt 0 |
| Erichsen cupping | ISO1520 | Depends on shade |
| Hardness (4000gms) | ISO 1518 | Pass – no penetration to substrate |
| Flexibility (Conical Mandrel) | ISO6860 | Depends on shade |
| Impact | BS6496 | Depends on shade |
在线联系供应商
Other supplier products
 |
Architectural Fluorocarbon Powder Coatings | Product introduction UV resistance, heat and humidity resistance, acid and alkali resistance, stain resistance, flame retardant/fire resistant and... |
 |
Blue Matte Powder Coating | Introduction AttributeDetails CAS No. 53808-41-6 Place of Origin China Main Raw Material EPOXY Usage Furniture P... |
 |
Light Gray Sand Texture Powder Coating | Introduction It is athermosetting powder coating based on epoxy polyester resin with excellent smooth glossyand good flowout finishes. Its outstan... |
 |
Modified acrylic copolymer emulsion STD-20135 | Introduction STD 20135 is a modified acrylic copolymer emulsion with excellent substrate adhesion and excellent sealing properties, especially sui... |
 |
Thin Coating Powder Series/extreme powder coating | Key Features & Specifications FeatureSpecification / Benefit Ultra-Thin Film Formation Achieves30–50μm film thicknesswhil... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
