Insulating Powder Coating
Product Features:
High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements for general enameled wire and electronic component encapsulation.
Capable of rapid low-temperature curing and can also utilize residual heat curing (for heat-resistant components).
Excellent adhesion and flexibility, with good moisture resistance, anti-aging properties, thermal stability, flame retardancy, and adjustable color options.
Edge coverage greater than 30%, with a breakdown voltage greater than 40KV/mm.
Resistant to heat, wear, water, acids, alkalis, and salts; the coating is continuous and smooth, with a very dense texture.
For large and heavy components, fluidized bed preheating and residual heat curing are recommended.
Product Parameters：
| Item | Quality Indicator | Test Method |
|---|---|---|
| Appearance | Uniform color, loose without lumps, dry powder flowability 120-140 mm | Visual inspection |
| Color | As per customer requirements | Combination of colorimeter and visual inspection |
| Adhesion | Cross-cut test (ISO 2409. GB/T 9286-1998) | 0 level, excellent |
| Impact Resistance | Impact tester (drop weight method) (ISO 6272. GB/T 1732-1993) | Good performance at 50 kg.cm |
| Flexibility | Bending test instrument (ISO 1519. GB 6742-1986) | 3 mm, excellent flexibility |
| Cupping Test | ISO 1520. GB/T 9753-1993 | Pass at 8 mm |
| Surface Hardness | Pencil hardness (Mitsubishi pencil) (ASTM D3363. GB/T 6739-1996) | 1H |
| Electrical Insulation | Breakdown voltage greater than 40KV/mm | Excellent |
| Humidity Resistance | ISO 6270. GB/T 1740-1979 | Over 1000 hours |
| Salt Spray Test | ISO 7253. GB/T 1771-1991 | Over 1000 hours |
Application Fields:
Motor casings
Motor stators and rotors
Instruments
Small transformers
Electronic components
在线联系供应商
Other supplier products
 |
Weather-resistant powder coating for coils | Introduction Conventional liquid coil coatings were successfully developed and applied in the late 1950s and early 1960s. To date, almost all pre-... |
 |
Antistatic Polyethylene Powder Coating | 1. Key Advantages of PE Powder Coatings Our PE coatings are engineered to provide superior protection and a high-quality finish through various ap... |
 |
Antimicrobial and Antiviral Powder Coating | Product Introduction: This product is formulated using special resins, curing agents, and specialized antimicrobial agents. It features high react... |
 |
Red Color Matte Powder Coating | Surface Finish Options Overview Powder type Epoxy-Polyester, Polyester Applications Exterior Industrial, Specialized Finish type Smoo... |
 |
Flame retardant insulation powder coating | Surface Finish Options Overview Brief description: Flame retardant insulation pressure-resistant powder coating made of pure epoxy resin, throu... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | 卖方: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | 卖方: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | 卖方: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | 卖方: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | 卖方: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
