Water-based hydroxy acrylic emulsion STD 4708
Product Description
Water-based hydroxy acrylic emulsion STD 4708 is a hydroxy acrylic copolymer emulsion.It is designed for Water base 2K wood paint.with excellent construction performance, good transparency, high hardness and excellent chemical resistance. Michiicide: CMIT/MIT 3:1 10ppm and MIT 200ppm.
Properties
1. excellent construction performance
2. high hardness
3. good transparency
4. Excellent chemical resistance.
Characteristic data*
| Property | Value | Unit | Method |
| Appearance | Translucent to milky white | ||
| Weight solids | 39-41 | wt% | WHPU/T（5cm,150℃,20min） |
| pH | 7.0-9.0 | GB 6920-1986 | |
| MFFT | 47 | ℃ | GB/T 9267-2008 |
| Viscosity | 10-2500 | mPa.s | GB/T2794-2013(Brookfield LV,63#/30rpm)，25℃ |
| OH (Based on solid) | ~1.6 | % |
*Property values represent typical results only and are not to be considered as specifications, subject to specific COA
Storage
The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after more than 12 months storage. The product should be protected from freezing during storage. After opening the packing, suggested to use up one time.Well filtration before using is necessary as normal water based binder.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Coarse Polytetrafluoroethylene (PTFE) Powder | Premium PTFE Powder Coating Solutions China-Based Manufacturing | Global Industrial Support We manufacture and export a comprehensive range of Po... |
 |
Powder coating series for vehicle compartment | Introduction With the development of environmental protection and energy conservation, the central environmental protection department and local g... |
 |
Metallic flat semi-gloss MT-019/93010 | Introduction No. MT-019/93010 Color Metallic color Surface Metallic flat semi-gloss System Weather-resistant polyeste... |
 |
Powder coating for New energy | Introduction Insulating powder coatings protect the strong power of new energy vehicles. The new energy vehicle market has developed rapidly in t... |
 |
Polyester based powder coatings MT-600 AM | Product Description MT-600 AM is a series of polyester based powder coatings, formulated with the use of TGIC, designed for the exterior environme... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
