.

filter element powder Coating

filter element powder Coating
  • filter element powder Coating
供应商: Standard International Group (HK) Limited

供应产品
在线联系供应商

Introduction

Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according to the industry’s requirements for powder coatings. We select materials for different industries and make corresponding adjustments to the process to better match the industry’s requirements. We provide customers with high-quality and low-cost products that are easy to use.

Product name filter element powder
Applicable industries automotive filter element
Powder specific gravity 1.2-1.8ɡ/cm³
Product features
  • Good flexibility, no powder burst after edge sealing.
  • Good air permeability, no bubbles after edge sealing.
Physical properties Bending ASTM D522 Passed-curvature diameter is 5mm.
GB/T1731 Passed-curvature diameter is 1mm
Dry adhesion ASTM D3359 Passed-result is 5B.
ISO 2409 Passed-result is 0 grade.
GB/T9286 Passed-result is 0 grade.
Cupping ISO 1520 Passed 5mm-No cracking or shedding of coating.
GB/T9753 Passed 5mm-No cracking or shedding of coating.
Impact resistance (positive impact) ASTM D2794 ≥50kg.cm
GB/T9753 50kg.cm
Pencil hardness (scratch hardness) ASTM D3363 ≥H
GB/T6739 ≥H
Storage stability 12 months (less than 30℃ environment). Re-test after expiration. If it meets the requirements, it can be used at will.
Curing process 200℃/12min, 180℃/15min (workpiece surface temperature).
Pretreatment All metal substrates need to be degreased and degreased, iron metals are treated with zinc or iron phosphating and aluminum chromium to improve corrosion resistance.
Coating
  • Manual or automatic spraying equipment can be used. To ensure the consistency of the coating, automatic spraying equipment is recommended.
  • Unsprayed powder can be recycled through an appropriate recycling system.
  • Atomizing air pressure ∽0.5 bar, primary air ∽0.5 bar, spraying voltage 40-90kv.
Damage repair Surface treatment: Grinding + air cleaning.

Application: Recoating mode,reduce spraying voltage.
Safety Warning
  • When spraying, do not eat, drink or smoke, and avoid inhalation of dust.
  • Wear a suitable breathing mask.
  • For more information, please ask the salesperson for the material safety data sheet of the specific product for reference.
Disclaimer Important note: The information provided in this table cannot be comprehensive and is based on current laws and current knowledge. Anyone who intends to use the product in areas other than those recommended in this table without first obtaining written confirmation from us of the product’s suitability will bear the consequences. It is the user’s unshirkable responsibility to take necessary measures to meet local legal and regulatory requirements. Please continue to read the material safety data sheet and technical parameter sheet of our products when you have time. We try our best to ensure that all the instructions for our products (in or outside the table) are correct, but we cannot fully control the quality or condition of the substrate and the many factors that may affect the use of the product. Therefore, unless we specifically confirm in writing, we do not assume any responsibility for loss of product performance and any other loss or damage caused by the use of the product. All products and technical recommendations we provide are subject to our standard terms and conditions of sale. Please obtain a copy of this document and read it carefully. The content of this table will be supplemented and improved as we accumulate experience and update policies. Before using the product, the user should verify whether the data in this table is the latest.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Sand-Textured Wood Grain Powder
 Sand-Textured Wood Grain Powder Introduction Sand-textured wood grain powder is a specialized powder coating designed to replicate the natural texture and appearance of wood whil...
Agricultural machinery powder Coating
 Agricultural machinery powder Coating Brief description Made with saturated polyester resin and curing agent such as TGIC or HAA as the main base material. Features Excellent mechani...
Skin-Feel Powder Coating
 Skin-Feel Powder Coating Introduction Key Features & Specifications FeatureSpecification / Benefit Skin-Like Texture Coating surface replicatessoft, delic...
Low-Gloss Powder Coatings
 Low-Gloss Powder Coatings Introduction Our low-gloss powder coatings are ideal for a wide range of applications, including furniture, appliances, automotive parts, metal pa...
Conductive Powder Coating
 Conductive Powder Coating Product Features: Dissipates static electricity to protect the normal operation of low-voltage or micro-electronic components. Prevents the occur...
供应产品

Same products

蓝翠鸟威尼斯灰泥涂料 墙面艺术灰泥 奢华质感
 蓝翠鸟威尼斯灰泥涂料 墙面艺术灰泥 奢华质感 卖方: 中山蓝翠鸟新型环保材料有限公司 产品概述 蓝翠鸟威尼斯灰泥是商业空间与艺术场馆优选的艺术涂装材料，以精选天然石膏、环保水性成膜物质为原料，肌理独特且富有层次感，耐擦洗、易维护，适配商业展厅墙面、艺术画廊展墙、高端餐厅主题墙面...
蓝翠鸟天鹅绒纹理漆 室内设计高级感墙面装饰漆
 蓝翠鸟天鹅绒纹理漆 室内设计高级感墙面装饰漆 卖方: 中山蓝翠鸟新型环保材料有限公司 产品概述 这是一款为空间注入情绪的涂料。天鹅绒般柔和的哑光表面，拥有安抚视觉和心灵的效果，能自然营造出宁静、安全、包裹感的氛围。特别适用于打造家庭阅读角、私人工作室、瑜伽室或任何您需要放松...
蓝翠鸟 水包砂 | 高弹抗裂 外墙专用涂料
 蓝翠鸟 水包砂 | 高弹抗裂 外墙专用涂料 卖方: 中山蓝翠鸟新型环保材料有限公司 产品概述 蓝翠鸟高弹抗裂水包砂，专为应对墙体细微开裂问题而设计。其涂层具备优异的弹性与延展性，能有效桥接并遮盖基层微裂缝，适用于易产生温度应力或轻微沉降的建筑外墙，提供持久的完美外观。 ...
蓝翠鸟 简修天鹅绒覆盖漆 | 旧墙翻新神器 遮盖涂料
 蓝翠鸟 简修天鹅绒覆盖漆 | 旧墙翻新神器 遮盖涂料 卖方: 中山蓝翠鸟新型环保材料有限公司 产品概述 厌倦了老旧的墙面？蓝翠鸟简修天鹅绒漆是您的快速翻新方案。它拥有超强的遮盖力和附着力，能直接覆盖大多数旧墙面（如乳胶漆、腻子层），简化施工步骤。快速赋予老旧空间全新的天鹅绒质感与现...
商业空间用瓷砖胶——高效施工、耐磨耐用
 商业空间用瓷砖胶——高效施工、耐磨耐用 卖方: 中山蓝翠鸟新型环保材料有限公司 产品概述 瓷砖胶是适用于商场、酒店、写字楼等商业空间的专业粘结材料，以优质水泥、级配石英砂、特种聚合物改性剂为原料，采用薄贴工艺实现高效贴砖，提升施工效率，且具备优异耐磨性，可承受高人流量磨损...