.

Gray wrinkle color powder coating

COLORS AVAILABLE

RAL colors coating powder

Pantone colors

Color-matching regarding customer requirement is available

PHYSICAL PROPERTIES

Specific gravity :1.2 ~1.8g/cm3 up to colors

Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

Level of liquidity:24 ~27 mm

CURING CONDITIONS

180 °C ~200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters /kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is anon-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property

Testing items Standards and methods Inspecting index
Impact strength GB/T1732-1993. AS3715 2.8 >50kg/cm
Bending resistance GB/T1185-88. AS1580 402.1. ISO9227 Pass 2-5 millimeters
Adhesion CHECKED TEST GB/T9286-88.2mm Cross cut, ISO2409 Pass100/100. passes 0levels
Cupdrawing:Erichsen, ISO1520 Erichsen, ISO1520 Pass 3-7 millimeters

Chemical resistance and weather resistance

Salt spray test GB/T1771-91.500 hours The cross section of corrosion less than 2MM
Hot and damp resistance test GB/T,1000 hours Without air bubbles, loses the light slightly
Acid resistance 10% CH3COOH, 240 hours Without air bubbles, the surface without damage
Alkali resistance 10% NaOH, 240 hours Without air bubbles, the surface without damage
Heat resistance 200degree,1 hour The color change is lower than E=1.5
Solvent resistance MEK24 hours soaked in solvent-free Without air bubbles, the surface without damage
Uvioresistant QUV-313.500 hours Gloss higher than 80% lower than the

Munsell color change level

Water tolerance of 2 hours No bubble, not falling, losing light

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Light Blue Wrinkle Color Powder Coating
Light Blue Wrinkle Color Powder Coating Storage: Keep in a dry cool area (max. 25°C, 60% RH) Shelf life: 12 months Package type: Cardboard box Color standard:RAL RAL colors:RAL...
Polyamide rheology additives CRAYVALLAC MT
Polyamide rheology additives CRAYVALLAC MT Product Benefits Polyamide rheology additives/CRAYVALLAC MT is a micronised amide modified hydrogenated castor oil rheology modifier for solvent-b...
Insulating Powder Coating
Insulating Powder Coating Product Features: High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements...
Epoxy Anti-Corrosion Powder Coating for Reinforcing Steel
Epoxy Anti-Corrosion Powder Coating for Reinforcing Steel Product Introduction: This is a thermosetting epoxy-modified heavy-duty anti-corrosion powder coating specifically designed for epoxy-coated reinf...
Hardware powder
Hardware powder Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder accordi...
供应产品

Same products

Easy-cleaning Silicone-Modified Waterborne UV Resin
Easy-cleaning Silicone-Modified Waterborne UV Resin 卖方: Guangzhou Human New Material Science and Technology Co., Ltd LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d...
Water-based Soft-Touch Resin for Consumer Electronics
Water-based Soft-Touch Resin for Consumer Electronics 卖方: Guangzhou Human New Material Science and Technology Co., Ltd Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve...
Conformal Coatings
Conformal Coatings 卖方: Guangzhou Human New Material Science and Technology Co., Ltd The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro...
Metalized & Laser Transfer coating
Metalized & Laser Transfer coating 卖方: Guangzhou Human New Material Science and Technology Co., Ltd Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ...
Hydrophilic coatings for Air Conditioner
Hydrophilic coatings for Air Conditioner 卖方: Guangzhou Human New Material Science and Technology Co., Ltd A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi...