Powder coating primer containing zinc MT-PZ ALZ55N
Product Description
MT-PZ is a powder coating primer containing zinc which is designed to give enhanced corrosion protection of mild steel. This duplex system combines cathodic protection and barrier effect. Dedicated to steel protection with a surface pre-treatment obtained by grit/shot. MT- PZ is based on a specific epoxy zinc rich formulation that brings conductivity to enable the cathodic protection. MT-PZ includes a specific anticorrosive function which improves the protection in case of scratch.
Powder Properties
| Chemical type | Thermosetting epoxy |
| Appearance | Smooth |
| Color | Grey |
| Recommended Film Thickness (µm) | 70 – 120 µm |
| Density (g/cm3) | 2.9 ± 0.03 g/cm³ |
| Application | Electrostatic |
| Storage | Under dry, cool (≤ 30°C) conditions |
| Shelf life | At least 12 months from production date |
Pretreatment
Surface preparation depends upon the metal, the type of surface, its conditions and the required performance. See our recommendation for pretreatment to be used with MT- PZ.
| Substrate | Mechanical pretreatment | Chemical pretreatment |
| Mild steel | Grit Blasting Sa 2.5 in accordance with ISO NF EN 8501-1. Roughness: Rz 35 60 µm / Ra 6-12 µm | Banned |
| Cast steel | ||
| Electro Zinc steel | Banned | |
| Hot dip galvanized steel | ||
| Zinc sprayed (gas flame/electrical deposition) |
Application
MT-PZ is suitable for corona electrostatic spraying. Tribo application is not recommended.
| Application settings | Fluidizing air pressure: 1.5kg/cm² initially then 1kg/cm²
Transport air pressure: 0.5 to 0.8 kg/cm Recommended voltage: 65 to 70kV |
| Curing limits | Primer should be cured, or at least gelled, using the recommended curing schedules, before application of the topcoat. The object temperature must not be below 110°C or above 180°C.
The primer should be cured in a convection oven, optionally with infra-red heaters, with air temperature not exceeding 180°C. |
| Recommended film thickness | 70-120 µm A good protection is linked with the recommended film thickness. |
| Recycling | Trials, with suitable recycling equipment, must be carried out before commencing production. Attention should be paid to the ratio of new powder, a minimum of 70% must be used. Gun nozzles must be cleaned every 30 minutes. |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Flat high gloss MT-04915000 | Introduction No. MT-049/15000 Color White Surface Flat high gloss System Polyester Scope of application Lightin... |
|
|
Steel pipeline powder coating | Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”... |
 |
High Temperature Curing Powder Coating | Introduction We are a professional powder coating manufacturer based in China, specializing in High Cure Powder Coating designed for demanding ind... |
 |
Flat matte MT-6297A549 | Introduction No. MT-629/7A549 Color Gray Surface Flat matte System Super weather-resistant polyester Scope of ap... |
|
|
Brake pad powder | Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according t... |
Same products
 |
蓝翠鸟威尼斯灰泥涂料 墙面艺术灰泥 奢华质感 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 蓝翠鸟威尼斯灰泥是商业空间与艺术场馆优选的艺术涂装材料，以精选天然石膏、环保水性成膜物质为原料，肌理独特且富有层次感，耐擦洗、易维护，适配商业展厅墙面、艺术画廊展墙、高端餐厅主题墙面... |
 |
蓝翠鸟天鹅绒纹理漆 室内设计高级感墙面装饰漆 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 这是一款为空间注入情绪的涂料。天鹅绒般柔和的哑光表面，拥有安抚视觉和心灵的效果，能自然营造出宁静、安全、包裹感的氛围。特别适用于打造家庭阅读角、私人工作室、瑜伽室或任何您需要放松... |
 |
蓝翠鸟 水包砂 | 高弹抗裂 外墙专用涂料 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 蓝翠鸟高弹抗裂水包砂，专为应对墙体细微开裂问题而设计。其涂层具备优异的弹性与延展性，能有效桥接并遮盖基层微裂缝，适用于易产生温度应力或轻微沉降的建筑外墙，提供持久的完美外观。 ... |
 |
蓝翠鸟 简修天鹅绒覆盖漆 | 旧墙翻新神器 遮盖涂料 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 厌倦了老旧的墙面？蓝翠鸟简修天鹅绒漆是您的快速翻新方案。它拥有超强的遮盖力和附着力，能直接覆盖大多数旧墙面（如乳胶漆、腻子层），简化施工步骤。快速赋予老旧空间全新的天鹅绒质感与现... |
 |
商业空间用瓷砖胶——高效施工、耐磨耐用 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 瓷砖胶是适用于商场、酒店、写字楼等商业空间的专业粘结材料，以优质水泥、级配石英砂、特种聚合物改性剂为原料，采用薄贴工艺实现高效贴砖，提升施工效率，且具备优异耐磨性，可承受高人流量磨损... |
